Mga bahin:
- Broadband
- Taas nga Gahum
- Ubos nga Insertion Loss
Ang single directional couplers naglangkob sa usa ka input ug usa ka output diin ang impormasyon mahimo lamang ipadala sa usa ka direksyon ug dili ngadto sa input. Ang mga one-way coupler sagad gigamit sa pagpanalipod sa sensitibo nga datos ug sistema sama sa pinansyal nga datos, sekreto sa gobyerno, paniktik sa militar, ug uban pa. Ilang gisiguro nga ang datos giproseso ug gitipigan lamang sa luwas nga mga palibot, pagpanalipod sa mga sistema gikan sa malware, mga virus, ug mga hacker. Ang unidirectional couplers mahimong ipatuman base sa lain-laing mga teknolohiya, lakip ang magnetic coupling, capacitive coupling, ug optical coupling. Lakip niini, ang optical coupling usa sa labing kasagarang gigamit nga teknolohiya tungod kay naghatag kini og high-speed ug high-security nga transmission data. Sa konklusyon, ang one-way coupler usa ka importante nga electronic device nga gigamit aron limitahan ang dagan sa impormasyon ug mapanalipdan ang seguridad sa sistema. Kini kaylap nga gigamit sa pinansyal, gobyerno, militar ug uban pang mga sitwasyon sa seguridad.
1. Makapadala lamang kini og mga signal sa usa ka direksyon ug adunay maayo nga signal isolation.
2. Makahatag kini og usa ka pirmi nga pagkawala sa signal sulod sa usa ka frequency range, ug ang kasagarang gigamit nga coupling coefficients kasagaran 3dB, 6dB, ug uban pa.
3. Yano nga istruktura, gamay nga gidak-on, ug taas nga kasaligan.
4. Makasugakod sa high-power signals.
1. Para sa pagsulay ug pagsukod: Ang unidirectional couplers mahimong gamiton sa pagsulay ug pagsukod sa signal power ug amplitude sa microwave components o systems, ingon man usab sa pag-detect sa frequency ug phase differences sa reflected signals.
2. Alang sa pag-apod-apod sa kuryente: Ang usa ka unidirectional coupler mahimong magsilbi nga power divider aron maapod-apod ang input signal sa daghang output port.
3. Gigamit sa pag-adjust sa signal amplitude: Ang usa ka unidirectional coupler mahimong magsilbi nga signal attenuator aron ma-adjust ang signal amplitude pinaagi sa pagkontrol sa coupling coefficient.
4. Para sa interference alignment: Unidirectional couplers mahimong gamiton para sa interference alignment, nga naglakip sa pag-embed sa interference signal ngadto sa nasulayan nga sistema o kagamitan aron masulayan ang kalig-on ug kasaligan niini.
Qualwavenagsuplay sa broadband ug high power nga single directional couplers sa halapad nga range gikan sa 3kHz hangtod 86GHz. Ang mga coupler kaylap nga gigamit sa daghang mga aplikasyon.
Numero sa Bahin | Frequency(GHz, Min.) | Frequency(GHz, Max.) | Gahum(W) | Pagdugtong(dB) | Pagkawala sa Pagsal-ot(dB, Max.) | Direktibidad(dB, Min.) | VSWR(Max.) | Mga konektor | Panahon sa Pagpangulo(mga semana) |
---|---|---|---|---|---|---|---|---|---|
QSDC-0.003-100-1-10-S | 3K | 0.1 | 1 | 10±1 | 1.6 | - | 1.35 | SMA | 2~4 |
QSDC-0.009-50-K2-50-NS | 9K | 0.05 | 200 | 50±1 | 0.5 | 16 | 1.2 | SMA&N | 2~4 |
QSDC-0.009-100-2K-50-NS | 9K | 0.1 | 2000 | 50±0.5 | 0.5 | 18 | 1.3 | N&SMA | 2~4 |
QSDC-0.009-250-K6 | 9K | 0.25 | 600 | 50±2 | 0.4 | 16 | 1.2 | SMA&N | 2~4 |
QSDC-0.009-400-K5-50-NS | 9K | 0.4 | 500 | 50±2 | 0.6 | 16 | 1.2 | SMA&N | 2~4 |
QSDC-1-10-K15-20-S | 0.001 | 0.01 | 150 | 20±0.5 | 0.2 | 20 | 1.2 | SMA | 2~4 |
QSDC-1-200-1 | 0.001 | 0.2 | 1 | 10±0.5, 20±0.8 | 0.8 | 18 (tip.) | 1.2 | SMA | 2~4 |
QSDC-5-1000-1-10-S | 0.005 | 1 | 1 | 10±0.8 | 1.4 | 16 | 1.25 | SMA | 2~4 |
QSDC-10-500-50-30-NS | 0.01 | 0.5 | 50 | 30±1 | 0.7 | 20 | 1.3 | SMA&N | 2~4 |
QSDC-10-500-K1-50-NS | 0.01 | 0.5 | 100 | 50±1.5 | 0.2 | 18 | 1.2 | SMA&N | 2~4 |
QSDC-10-1000-K2 | 0.01 | 1 | 200 | 40±1 | 0.45 | 20 | 1.35 | SMA&N | 2~4 |
QSDC-10-6000-R3-16-N | 0.01 | 6 | 0.3 | 16±1.2 | 2.5 | 15 | 1.5 | N | 2~4 |
QSDC-20-100-K6-50-NS | 0.02 | 0.1 | 600 | 50±0.8 | 0.2 | 18 | 1.15 | N&SMA | 2~4 |
QSDC-20-200-K6-55-NS | 0.02 | 0.2 | 600 | 55±1 | 0.15 | 19 | 1.2 | N&SMA | 2~4 |
QSDC-20-200-2K5-55-7S | 0.02 | 0.2 | 2500 | 55±1 | 0.15 | 19 | 1.2 | 7/16DIN(L29)&SMA | 2~4 |
QSDC-20-1000-50 | 0.02 | 1 | 50 | 10.5±1,20±1.5 | 0.84 | 18 | 1.5 | SMA&N | 2~4 |
QSDC-20-1000-K15-50-S | 0.02 | 1 | 150 | 50±1 | 0.4 | 20 | 1.5 | SMA | 2~4 |
QSDC-20-1000-K5-50-N | 0.02 | 1 | 500 | 50±2 | 0.3 | 16 | 1.6 | N | 2~4 |
QSDC-30-500-K2 | 0.03 | 0.5 | 200 | 40±1 | 0.3 | 20 | 1.3 | SMA&N | 2~4 |
QSDC-30-1000-50-20-S | 0.03 | 1 | 50 | 20±1.5 | 0.65 | 20 | 1.5 | SMA | 2~4 |
QSDC-50-1000-K8-50-NS | 0.05 | 1 | 800 | 50±2 | 0.3 | 20 | 1.3 | N&SMA | 2~4 |
QSDC-80-420-50 | 0.08 | 0.42 | 50 | 20±1,40±1 | 0.4 | 20 | 1.25 | N&BNC | 2~4 |
QSDC-80-1000-K1-45-S | 0.08 | 1 | 100 | 45±1 | 0.5 | 8 | 1.3 | SMA | 2~4 |
QSDC-80-1000-K25 | 0.08 | 1 | 250 | 40±1 | 0.3 | 16 | 1.2 | SMA&N | 2~4 |
QSDC-80-1000-K6-60-NS | 0.08 | 1 | 600 | 60±1 | 0.4 | 20 | 1.2 | SMA&N | 2~4 |
QSDC-80-1000-1K-50-NS | 0.08 | 1 | 1000 | 50±1 | 0.3 | 20 | 1.3 | N&SMA | 2~4 |
QSDC-80-1000-1K-60-NS | 0.08 | 1 | 1000 | 60±1 | 0.3 | 18 | 1.6 | SMA&N | 2~4 |
QSDC-80-1000-1K2-50-EN | 0.08 | 1 | 1200 | 50±1 | 0.3 | 18 | 1.3 | SC&N | 2~4 |
QSDC-80-1000-3K5-50-A1N | 0.08 | 1 | 3500 | 50±1 | 0.35 | 15 | 1.3 | IF70(1-5/8″)&N | 2~4 |
QSDC-100-110-10-10-S | 0.1 | 0.11 | 10 | 10±1 | 1 | 20 | 1.2 | SMA | 2~4 |
QSDC-100-520-K6-50-NS | 0.1 | 0.52 | 600 | 50±0.8 | 0.2 | 20 | 1.2 | N&SMA | 2~4 |
QSDC-100-600-K2-40-N | 0.1 | 0.6 | 200 | 40±1 | 0.3 | 18 | 1.3 | N | 2~4 |
QSDC-100-700-10-10-S | 0.1 | 0.7 | 10 | 10±2 | 0.9 | 12 | 1.3 | SMA | 2~4 |
QSDC-130-470-50-6-S | 0.13 | 0.47 | 50 | 6±1.2 | 0.7 | 20 | 1.25 | SMA | 2~4 |
QSDC-180-220-2K-40-NS | 0.18 | 0.22 | 2000 | 40±0.3 | 0.2 | 20 | 1.3 | N&SMA | 2~4 |
QSDC-200-300-K5-40-N | 0.2 | 0.3 | 500 | 40±1.5 | 0.3 | 16 | 1.2 | N | 2~4 |
QSDC-200-700-K2-30-S | 0.2 | 0.7 | 200 | 30±1 | 0.4 | 18 | 1.3 | SMA | 2~4 |
QSDC-200-2000-50-30-S | 0.2 | 2 | 50 | 30±1.5 | 0.8 | 15 | 1.3 | SMA | 2~4 |
QSDC-300-800-50-30-S | 0.3 | 0.8 | 50 | 30±1 | 0.3 | 10 | 1.2 | SMA | 2~4 |
QSDC-300-2400-30 | 0.3 | 2.4 | 30 | 10,20,30 | 1 | 18 | 1.3 | SMA | 2~4 |
QSDC-300-4000-50-30-S | 0.3 | 4 | 50 | 30±1.5 | 1 | 12 | 1.4 | SMA | 2~4 |
QSDC-300-6000-K6 | 0.3 | 6 | 600 | 30±0.9,40±1 | 0.7 | 15 | 1.4 | N&SMA | 2~4 |
QSDC-300-8000-20-20-S | 0.3 | 8 | 20 | 20±1 | 1.3 | 18 | 1.35 | SMA | 2~4 |
QSDC-300-10000-50 | 0.3 | 10 | 50 | 10±2,20±2,30±2 | 2.5 | 8 | 1.6 | SMA | 2~4 |
QSDC-300-18000-30 | 0.3 | 18 | 30 | 6±0.8,10±0.8,20±0.8 | 3 | 13 | 1.4 | SMA | 2~4 |
QSDC-300-26500-30 | 0.3 | 26.5 | 30 | 6±0.9,10±0.9 | 3.5 | 11 | 1.5 | SMA | 2~4 |
QSDC-300-40000-20-30-K | 0.3 | 40 | 20 | 30±1.2 | 4.2 | 10 | 1.7 | 2.92mm | 2~4 |
QSDC-300-67000-12-20-V | 0.3 | 67 | 12 | 20±2 | 6.1 | 7 | 1.9 | 1.85mm | 2~4 |
QSDC-350-700-8K-50-7N | 0.35 | 0.7 | 8000 | 50±1.2 | 0.3 | 18 | 1.3 | 7/16DIN(L29)&N | 2~4 |
QSDC-375-6000-30-30-S | 0.375 | 6 | 30 | 30±1.6 | 0.5 | 18 | 1.25 | SMA | 2~4 |
QSDC-400-600-K8-50-NS | 0.4 | 0.6 | 800 | 50±0.8 | 0.3 | 20 | 1.3 | N&SMA | 2~4 |
QSDC-400-800-K8-40-NS | 0.4 | 0.8 | 800 | 40±1 | 0.3 | 18 | 1.3 | N&SMA | 2~4 |
QSDC-400-1560-30-10-S | 0.4 | 1.56 | 30 | 10±1.2 | 1.1 | 20 | 1.3 | SMA | 2~4 |
QSDC-400-2500-10 | 0.4 | 2.5 | 10 | 10,20,30 | 1 | 18 | 1.3 | SMA | 2~4 |
QSDC-400-2500-K5-50-NS | 0.4 | 2.5 | 500 | 50±1.2 | 0.3 | |8 | 1.3 | N&SMA | 2~4 |
QSDC-400-2700-K2-40-N | 0.4 | 2.7 | 200 | 40±1.5 | 0.5 | 20 | 1.5 | N | 2~4 |
QSDC-400-2700-K4-40-N | 0.4 | 2.7 | 400 | 40±1.2 | 0.4 | 20 | 1.2 | N | 2~4 |
QSDC-400-3000-10-20-S | 0.4 | 3 | 10 | 20±1 | 0.5 | 20 | 1.3 | SMA | 2~4 |
QSDC-400-3000-K3-50-S | 0.4 | 3 | 300 | 50±2.5 | 0.5 | 20 | 1.2 | SMA | 2~4 |
QSDC-400-3900-K1-20-N | 0.4 | 3.9 | 100 | 20±2 | 0.5 | 17 | 1.2 | SMA&N | 2~4 |
QSDC-400-3900-K15-15-NS | 0.4 | 3.9 | 150 | 15±1.5 | 0.5 | 16 | 1.25 | SMA&N | 2~4 |
QSDC-400-3900-K2-39-N | 0.4 | 3.9 | 200 | 39±1.5 | 0.3 | 18 | 1.25 | N | 2~4 |
QSDC-400-4200-K2-40-N | 0.4 | 4.2 | 200 | 40±1.8 | 0.35 | 12 | 1.3 | N | 2~4 |
QSDC-400-6000-20 | 0.4 | 6 | 20 | 5±1,7±1,10±1,20±1 | 2.3 | 12 | 1.4 | N | 2~4 |
QSDC-400-6000-K6 | 0.4 | 6 | 600 | 30±0.8,40±0.9 | 0.6 | 15 | 1.3 | N&SMA | 2~4 |
QSDC-400-8000-K6 | 0.4 | 8 | 600 | 30±0.9,40±1 | 0.7 | 14 | 1.4 | N&SMA | 2~4 |
QSDC-400-8000-K25 | 0.4 | 8 | 250 | 30±0.9,40±1 | 0.7 | 14 | 1.4 | N&SMA | 2~4 |
QSDC-400-18000-50 | 0.4 | 18 | 50 | 10±1.5,20±1.5 | 1.5 | 10 | 1.8 | SMA | 2~4 |
QSDC-400-20000-10-10-S | 0.4 | 20 | 10 | 10±1.5 | 2.5 | 8 | 1.7 | SMA | 2~4 |
QSDC-400-20000-10-20-S | 0.4 | 20 | 10 | 20±1.5 | 1.5 | 8 | 1.5 | SMA | 2~4 |
QSDC-410-490-3K-50-NS | 0.41 | 0.49 | 3000 | 50±0.5 | 0.3 | 20 | 1.3 | N&SMA | 2~4 |
QSDC-450-2500-50-6-S | 0.45 | 2.5 | 50 | 6±1 | 0.8 | 18 | 1.2 | SMA | 2~4 |
QSDC-450-6000-30 | 0.45 | 6 | 30 | 10,20,30 | 1.2 | 12 | 1.5 | SMA | 2~4 |
QSDC-470-860-K5 | 0.47 | 0.86 | 500 | 30±0.75,40±0.75,50±0.75 | 0.3 | 20 | 1.15 | 7/16DIN | 2~4 |
QSDC-500-1000-30 | 0.5 | 1 | 30 | 10,20,30 | 0.4 | 20 | 1.3 | SMA | 2~4 |
QSDC-500-2000-10-15-S | 0.5 | 2 | 10 | 15±1 | 1 | 18 | 1.3 | SMA | 2~4 |
QSDC-500-2000-30 | 0.5 | 2 | 30 | 10±1, 20±1, 30±1 | 0.8 | 20 | 1.25 | SMA | 2~4 |
QSDC-500-2000-50-6-S | 0.5 | 2 | 50 | 6±0.6 | 0.4 | 20 | 1.25 | SMA | 2~4 |
QSDC-500-2000-50 | 0.5 | 2 | 50 | 10±1, 20±1, 30±1 | 0.4 | 20 | 1.2 | SMA | 2~4 |
QSDC-500-2000-K8-50-NS | 0.5 | 2 | 800 | 50±0.8 | 0.3 | 18 | 1.35 | N&SMA | 2~4 |
QSDC-500-3000-K5-60-NS | 0.5 | 3 | 500 | 60±2 | 0.4 | 16 | 1.4 | SMA&N | 2~4 |
QSDC-500-6000-30 | 0.5 | 6 | 30 | 20±1,30±1.5 | 1 | 18 | 1.4 | SMA | 2~4 |
QSDC-500-6000-K2 | 0.5 | 6 | 200 | 40±2 | 0.6 | 15 | 1.5 | SMA&N | 2~4 |
QSDC-500-6000-K3-40-N | 0.5 | 6 | 300 | 40±2 | 0.6 | 15 | 1.5 | N | 2~4 |
QSDC-500-6000-K6 | 0.5 | 6 | 600 | 30±0.7, 40±0.8 | 0.6 | 15 | 1.3 | N&SMA | 2~4 |
QSDC-500-8000-50 | 0.5 | 8 | 50 | 10±1, 20±1 | 1.2 | 12 | 1.5 | SMA | 2~4 |
QSDC-500-8000-K25 | 0.5 | 8 | 250 | 30±0.8, 40±0.9 | 0.5 | 14 | 1.4 | N&SMA | 2~4 |
QSDC-500-8000-K6 | 0.5 | 8 | 600 | 30±0.8, 40±0.9 | 0.7 | 14 | 1.4 | N&SMA | 2~4 |
QSDC-500-8500-K1-40-N | 0.5 | 8.5 | 100 | 40±2, 41±3.5 | 0.5 | 12 | 1.5 | N | 2~4 |
QSDC-500-12000-80-20-S | 0.5 | 12 | 80 | 20±1 | 1 | 12 | 1.6 | SMA | 2~4 |
QSDC-500-18000-50 | 0.5 | 18 | 50 | 10±1, 20±1, 30±1.5, 20±0.6, 30±1.8 | 1.8 | 10 | 1.6 | SMA&N | 2~4 |
QSDC-500-18000-30-6-S | 0.5 | 18 | 30 | 6±0.8 | 2.6 | 14 | 1.5 | SMA | 2~4 |
QSDC-500-18000-K25 | 0.5 | 18 | 250 | 30±1.2, 40±1.2 | 1 | 10 | 1.6 | N&SMA | 2~4 |
QSDC-500-18000-K4 | 0.5 | 18 | 400 | 30±1.2, 40±1.2 | 1 | 10 | 1.6 | N&SMA | 2~4 |
QSDC-500-18500-20-10-S | 0.5 | 18.5 | 20 | 10±1 | 1.6 | 10 | 1.6 | SMA | 2~4 |
QSDC-500-26500-30 | 0.5 | 26.5 | 30 | 6±0.8, 10±1.8, 20±1.8, 30±2.5 | 2.9 | 13 | 1.7 | SMA | 2~4 |
QSDC-500-40000-20 | 0.5 | 40 | 20 | 6±1, 10±1, 20±1 | 3.9 | 10 | 1.7 | 2.92mm | 2~4 |
QSDC-500-50000-20 | 0.5 | 50 | 20 | 10±1.2, 20±1.2 | 3.6 | 8 | 1.8 | 2.4mm | 2~4 |
QSDC-600-2700-K4-40-N | 0.6 | 2.7 | 400 | 40±1.5 | 0.3 | 20 | 1.15 | N | 2~4 |
QSDC-600-2700-3K-50-7S | 0.6 | 2.7 | 3000 | 50±1.5 | 0.45 | 16 | 1.35 | 7/16DIN(L29)&SMA | 2~4 |
QSDC-600-3000-K2-20-NS | 0.6 | 3 | 200 | 20±1.2 | 0.7 | 16 | 1.35 | SMA&N | 2~4 |
QSDC-600-3000-K5-40-NS | 0.6 | 3 | 500 | 40±1 | 0.35 | 16 | 1.5 | SMA&N | 2~4 |
QSDC-600-3900-50-10-S | 0.6 | 3.9 | 50 | 10±1.5 | 0.5 | 18 | 1.2 | SMA | 2~4 |
QSDC-600-3900-50-20-S | 0.6 | 3.9 | 50 | 20±1.5 | 0.5 | 12 | 1.2 | SMA | 2~4 |
QSDC-600-6000-50 | 0.6 | 6 | 50 | 10±1, 20±1.2, 30±1 | 1 | 15 | 1.3 | SMA | 2~4 |
QSDC-600-40000-30-10-K | 0.6 | 40 | 30 | 10±2.8 | 3.8 | 8 | 1.8 | 2.92mm | 2~4 |
QSDC-698-960-K25-50-NS | 0.698 | 0.96 | 250 | 50±0.7 | 0.3 | 23 | 1.3 | N&SMA | 2~4 |
QSDC-698-960-K5-50-NS | 0.698 | 0.96 | 500 | 50±0.7 | 0.3 | 18 | 1.3 | N&SMA | 2~4 |
QSDC-700-2700-50-30-S | 0.7 | 2.7 | 50 | 30±1 | 0.4 | 20 | 1.25 | SMA | 2~4 |
QSDC-700-6000-50 | 0.7 | 6 | 50 | 20±1 | 1 | 16 | 1.3 | SMA&N | 2~4 |
QSDC-700-6000-K6 | 0.7 | 6 | 600 | 30±0.7, 40±0.7 | 0.4 | 15 | 1.3 | N&SMA | 2~4 |
QSDC-700-18000-K25 | 0.7 | 18 | 250 | 30±1.2, 40±1.2 | 0.9 | 10 | 1.6 | N&SMA | 2~4 |
QSDC-800-2700-50-10-S | 0.8 | 2.7 | 50 | 10±1 | 1 | 18 | 1.2 | SMA | 2~4 |
QSDC-800-3000-K8-50-NS | 0.8 | 3 | 800 | 50±1.2 | 0.3 | 20 | 1.3 | N&SMA | 2~4 |
QSDC-800-3500-K2-40-N | 0.8 | 3.5 | 200 | 40±1.5 | 0.35 | 18 | 1.4 | N | 2~4 |
QSDC-800-12750-K1-10-N | 0.8 | 12.75 | 100 | 10±1 | 1.3 | 15 | 1.4 | N | 2~4 |
QSDC-800-12750-K1-10-S | 0.8 | 12.75 | 100 | 10±1 | 1.3 | 15 | 1.4 | SMA | 2~4 |
QSDC-910-920-K3-30-S | 0.91 | 0.92 | 300 | 30±0.5 | 0.2 | 20 | 1.2 | SMA | 2~4 |
QSDC-1000-2000-K8-50-NS | 1 | 2 | 800 | 50±0.8 | 0.2 | 20 | 1.3 | N&SMA | 2~4 |
QSDC-1000-3000-K5-50-NS | 1 | 3 | 500 | 50±1.2 | 0.35 | 18 | 1.3 | N&SMA | 2~4 |
QSDC-1000-4000-30 | 1 | 4 | 30 | 10, 20, 30 | 1 | 20 | 1.3 | SMA | 2~4 |
QSDC-1000-4000-50-20-S | 1 | 4 | 50 | 20±1 | 0.5 | 18 | 1.3 | SMA | 2~4 |
QSDC-1000-6000-K1 | 1 | 6 | 100 | 10±0.8, 15±1.5 | 0.8 | 10 | 1.4 | N | 2~4 |
QSDC-1000-6000-K3-30-NS | 1 | 6 | 300 | 30±1.5 | 0.6 | 16 | 1.35 | N&SMA | 2~4 |
QSDC-1000-6000-K1-40-NS | 1 | 6 | 100 | 40±1 | 0.4 | 12 | 1.8 | N&SMA | 2~4 |
QSDC-1000-6000-K6 | 1 | 6 | 600 | 30±0.7, 40±0.7 | 0.5 | 15 | 1.3 | N&SMA | 2~4 |
QSDC-1000-8000-30-30-S | 1 | 8 | 30 | 30±1.2 | 0.8 | 15 | 1.5 | SMA | 2~4 |
QSDC-1000-12400-30-20-S | 1 | 12.4 | 30 | 20±1 | 0.87 | 15 | 1.5 | SMA | 2~4 |
QSDC-1000-18000-30 | 1 | 18 | 30 | 6±0.6, 10±1, 16±1, 20±1, 30 | 2.5 | 10 | 1.6 | SMA&N | 2~4 |
QSDC-1000-18000-50-10-S | 1 | 18 | 50 | 10±1 | 1.2 | 12 | 1.6 | SMA | 2~4 |
QSDC-1000-18000-50-20-S | 1 | 18 | 50 | 20±1 | 1.2 | 12 | 1.6 | SMA | 2~4 |
QSDC-1000-18000-K25 | 1 | 18 | 250 | 30±1.2, 40±1.2 | 0.8 | 10 | 1.6 | N&SMA | 2~4 |
QSDC-1000-18000-K4 | 1 | 18 | 400 | 30±1.2, 40±1.2 | 0.8 | 10 | 1.6 | N&SMA | 2~4 |
QSDC-1000-26500-30-20-S | 1 | 26.5 | 30 | 20±1.5 | 2.2 | 10 | 1.7 | SMA | 2~4 |
QSDC-1000-26500-30 | 1 | 26.5 | 30 | 6±0.7, 10±0.5, 30±0.8 | 2.8 | 13 | 1.6 | SMA | 2~4 |
QSDC-1000-40000-20 | 1 | 40 | 20 | 6±0.8, 30±1.2 | 3.8 | 9 | 1.7 | 2.92mm | 2~4 |
QSDC-1000-40000-30 | 1 | 40 | 30 | 10±1.2, 16±1.5, 20±1.2 | 2.8 | 10 | 1.7 | 2.92mm | 2~4 |
QSDC-1000-50000-30 | 1 | 50 | 30 | 10±2, 20±2.5 | 2.8 | 10 | 1.7 | 2.4mm | 2~4 |
QSDC-1000-67000-20-10-V | 1 | 67 | 20 | 10±3.5 | 3.8 | 8 | 1.9 | 1.85mm | 2~4 |
QSDC-1200-1400-1K-50-7S | 1.2 | 1.4 | 1000 | 50±0.5 | 0.3 | 25 | 1.3 | 7/16DIN(L29)&SMA | 2~4 |
QSDC-1290-1310-70 | 1.29 | 1.31 | 70 | 6±1, 10±1 | 1.8 | 20 | 1.3 | N | 2~4 |
QSDC-1290-1310-K1 | 1.29 | 1.31 | 100 | 6±1, 10±1, 20±1 | 1.8 | 20 | 1.3 | N | 2~4 |
QSDC-1400-1900-K5-50-NS | 1.4 | 1.9 | 500 | 50±0.6 | 0.3 | 23 | 1.3 | N&SMA | 2~4 |
QSDC-1700-2200-K25-50-NS | 1.7 | 2.2 | 250 | 50±0.4 | 0.3 | 20 | 1.3 | N&SMA | 2~4 |
QSDC-1800-2200-K5-43-NS | 1.8 | 2.2 | 500 | 43±0.4 | 0.3 | 18 | 1.3 | N&SMA | 2~4 |
QSDC-1800-2200-K5-50-NS | 1.8 | 2.2 | 500 | 50±0.4 | 0.3 | 18 | 1.3 | N&SMA | 2~4 |
QSDC-2000-2500-K5-40-NS | 2 | 2.5 | 500 | 40 | 0.4 | 15 | 1.4 | SMA&N | 2~4 |
QSDC-2000-3000-50-20-S | 2 | 3 | 50 | 20 | 0.5 | 20 | 1.25 | SMA | 2~4 |
QSDC-2000-4000-50 | 2 | 4 | 50 | 10±1, 20±1, 30±1, 30±0.8 | 1 | 18 | 1.25 | SMA&N | 2~4 |
QSDC-2000-4000-K3-20-NS | 2 | 4 | 300 | 20±1 | 0.4 | 18 | 1.35 | SMA&N | 2~4 |
QSDC-2000-4000-K4-40-N | 2 | 4 | 400 | 40±1.5 | 0.5 | 10 | 1.3 | N | 2~4 |
QSDC-2000-4000-K4-40-NS | 2 | 4 | 400 | 40±1.2 | 0.5 | 10 | 1.3 | N&SMA | 2~4 |
QSDC-2000-4000-K5-50-NS | 2 | 4 | 500 | 50±1.5 | 0.4 | 20 | 1.25 | SMA&N | 2~4 |
QSDC-2000-4200-1K-40-7S | 2 | 4.2 | 1000 | 40±0.8 | 0.3 | 15 | 1.4 | 7/16DIN(L29)&SMA | 2~4 |
QSDC-2000-5000-1K-50-7S | 2 | 5 | 1000 | 50±1.5 | 0.3 | 10 | 1.5 | 7/16DIN(L29)&SMA | 2~4 |
QSDC-2000-6000-50-30-S | 2 | 6 | 50 | 30±1.2 | 0.5 | 15 | 1.3 | SMA | 2~4 |
QSDC-2000-6000-K25-40-NS | 2 | 6 | 250 | 40±2 | 0.6 | 11.5 | 1.3 | SMA&N | 2~4 |
QSDC-2000-6000-K3-40-NS | 2 | 6 | 300 | 40±0.5 | 0.3 | 16 | 1.3 | N&SMA | 2~4 |
QSDC-2000-6000-K4-45-NS | 2 | 6 | 400 | 45±1.5 | 0.5 | 10 | 1.5 | N&SMA | 2~4 |
QSDC-2000-6000-K6 | 2 | 6 | 600 | 30±0.7, 40±0.7 | 0.4 | 15 | 1.3 | N&SMA | 2~4 |
QSDC-2000-6500-K3-20-NS | 2 | 6.5 | 300 | 20±1.5 | 0.5 | - | 1.5 | N&SMA | 2~4 |
QSDC-2000-8000-10-10-N | 2 | 8 | 10 | 10±1.0 | 0.8 | 15 | 1.25 | N | 2~4 |
QSDC-2000-8000-50 | 2 | 8 | 50 | 6±1, 10±1, 20±1, 30±1 | 1.2 | 18 | 1.3 | SMA | 2~4 |
QSDC-2000-8000-K25 | 2 | 8 | 250 | 30±0.8, 40±0.8 | 0.4 | 14 | 1.4 | N&SMA | 2~4 |
QSDC-2000-8000-K5-30-NS | 2 | 8 | 500 | 30±1 | 0.6 | 14 | 1.5 | SMA&N | 2~4 |
QSDC-2000-8000-K6 | 2 | 8 | 600 | 30±0.8, 40±0.8 | 0.4 | 14 | 1.4 | N&SMA | 2~4 |
QSDC-2000-12000-30-10-S | 2 | 12 | 30 | 10 | 1.1 | 12 | 1.5 | SMA | 2~4 |
QSDC-2000-18000-30 | 2 | 18 | 30 | 10, 20, 30 | 1 | 10 | 1.6 | SMA | 2~4 |
QSDC-2000-18000-30-6-S | 2 | 18 | 30 | 6±0.6 | 2.3 | 15 | 1.6 | SMA | 2~4 |
QSDC-2000-18000-50-10-S | 2 | 18 | 50 | 10±1 | 0.7 | 12 | 1.5 | SMA | 2~4 |
QSDC-2000-18000-50-20-S | 2 | 18 | 50 | 20±1 | 0.7 | 12 | 1.5 | SMA | 2~4 |
QSDC-2000-18000-K2-50-NS | 2 | 18 | 200 | 50±2 | 0.6 | 10 | 1.6 | SMA&N | 2~4 |
QSDC-2000-18000-K25-40-NS | 2 | 18 | 250 | 40±1 | 0.6 | 10 | 1.6 | SMA&N | 2~4 |
QSDC-2000-18000-K4 | 2 | 18 | 400 | 30±1, 40±1 | 0.6 | 10 | 1.6 | N&SMA | 2~4 |
QSDC-2000-26500-30 | 2 | 26.5 | 30 | 6±0.7, 10±0.5, 16±1.5, 20±0.5, 30±0.6 | 2.6 | 12 | 1.7 | SMA | 2~4 |
QSDC-2000-40000-20 | 2 | 40 | 20 | 6±0.8 | 3.6 | 10 | 1.7 | 2.92mm | 2~4 |
QSDC-2000-40000-30 | 2 | 40 | 30 | 10±1.5, 16±1.2, 20±1.5, 30±1.5 | 2 | 10 | 1.7 | 2.92mm | 2~4 |
QSDC-2000-50000-20 | 2 | 50 | 20 | 10±2, 20±2 | 2 | 10 | 1.8 | 2.4mm | 2~4 |
QSDC-2000-67000-10-16-V | 2 | 67 | 10 | 16±4 | 3.5 | 8 | 2 | 1.85mm | 2~4 |
QSDC-2000-67000-12-10-V | 2 | 67 | 12 | 10±1.2 | 2.7 | 7 | 1.9 | 1.85mm | 2~4 |
QSDC-2200-2300-20 | 2.2 | 2.3 | 20 | 10±1, 20±1 | 0.5 | 20 | 1.3 | N | 2~4 |
QSDC-2200-2300-K5-43-NS | 2.2 | 2.3 | 500 | 43±0.3 | 0.3 | 16 | 1.3 | N&SMA | 2~4 |
QSDC-2300-2600-K5-40-NS | 2.3 | 2.6 | 500 | 40±0.5 | 0.4 | 20 | 1.25 | SMA&N | 2~4 |
QSDC-2300-2700-K25-50-NS | 2.3 | 2.7 | 250 | 50±0.4 | 0.3 | 23 | 1.3 | N&SMA | 2~4 |
QSDC-2300-2700-K5-50-NS | 2.3 | 2.7 | 500 | 50±0.4 | 0.3 | 18 | 1.3 | N&SMA | 2~4 |
QSDC-2500-6000-50-6-S | 2.5 | 6 | 50 | 6±1 | 0.8 | 20 | 1.2 | SMA | 2~4 |
QSDC-2700-3100-K2-40-NS | 2.7 | 3.1 | 200 | 40±2 | 0.3 | 18 | 1.3 | SMA&N | 2~4 |
QSDC-2700-3500-1K5-50-7S | 2.7 | 3.5 | 1500 | 50±0.8 | 0.35 | 16 | 1.3 | 7/16DIN(L29)&SMA | 2~4 |
QSDC-3000-6000-10-20-S | 3 | 6 | 10 | 20±1 | 0.5 | 18 | 1.3 | SMA | 2~4 |
QSDC-3300-3800-K2-10-N | 3.3 | 3.8 | 200 | 10±0.4 | 0.3 | 10 | 1.3 | N | 2~4 |
QSDC-3300-3800-K2-30-N | 3.3 | 3.8 | 200 | 30±0.4 | 0.3 | 10 | 1.3 | N | 2~4 |
QSDC-3300-3800-K5-50-NS | 3.3 | 3.8 | 500 | 50±0.4 | 0.3 | 15 | 1.3 | N&SMA | 2~4 |
QSDC-3400-4200-50-30-S | 3.4 | 4.2 | 50 | 30±1 | 0.5 | 15 | 1.3 | SMA | 2~4 |
QSDC-3500-4500-10-20-S | 3.5 | 4.5 | 10 | 20±1 | 0.5 | 20 | 1.3 | SMA | 2~4 |
QSDC-3800-4300-50-20-N | 3.8 | 4.3 | 50 | 20±1 | 0.5 | 20 | 1.3 | N | 2~4 |
QSDC-4000-6000-K4-40-N | 4 | 6 | 400 | 40±1.5 | 0.6 | 10 | 1.3 | SMA&N | 2~4 |
QSDC-4000-8000-50-10-S | 4 | 8 | 50 | 10±1 | 1 | 16 | 1.3 | SMA | 2~4 |
QSDC-4000-12000-50-6-S | 4 | 12 | 50 | 6±1 | 1.2 | 12 | 1.5 | SMA | 2~4 |
QSDC-4000-16000-30-10-S | 4 | 16 | 30 | 10±1.2 | 1.2 | 12 | 1.5 | SMA | 2~4 |
QSDC-4000-18000-20 | 4 | 18 | 20 | 10±1, 20±1, 30±1 | 1 | 10 | 1.5 | SMA | 2~4 |
QSDC-4000-18000-K3 | 4 | 18 | 300 | 30±1.5, 40±1.5 | 0.9 | 6 | 1.4 | N&SMA | 2~4 |
QSDC-4000-20000-20-20-N | 4 | 20 | 20 | 20±1 | 0.6 | 10 | 1.6 | SMA | 2~4 |
QSDC-4000-30000-30-20-K | 4 | 30 | 30 | 20±1 | 1.5 | 12 | 1.6 | 2.92mm | 2~4 |
QSDC-4000-50000-20-10-2 | 4 | 50 | 20 | 10±2 | 2 | 10 | 1.8 | 2.4mm | 2~4 |
QSDC-5900-7500-K15-40-NS | 5.9 | 7.5 | 150 | 40±0.8 | 0.6 | 12 | 1.5 | N&SMA | 2~4 |
QSDC-6000-10000-K12-40-NS | 6 | 10 | 120 | 40±0.5 | 0.3 | 15 | 1.4 | N&SMA | 2~4 |
QSDC-6000-18000-30-6-S | 6 | 18 | 30 | 6±0.5 | 2 | 15 | 1.4 | SMA | 2~4 |
QSDC-6000-18000-50 | 6 | 18 | 50 | 10±1, 20±1, 30±1 | 1 | 12 | 1.5 | SMA | 2~4 |
QSDC-6000-18000-50-10-S-1 | 6 | 18 | 50 | 10±0.6 | 0.6 | 12 | 1.5 | SMA | 2~4 |
QSDC-6000-18000-50-20-S-1 | 6 | 18 | 50 | 20±0.5 | 0.6 | 15 | 1.4 | SMA | 2~4 |
QSDC-6000-18000-80-35-S | 6 | 18 | 80 | 35±1 | 0.5 | 10 | 1.5 | SMA | 2~4 |
QSDC-6000-18000-K2-30-NS | 6 | 18 | 200 | 30±1.5 | 0.5 | 10 | 1.8 | SMA&N | 2~4 |
QSDC-6000-18000-K25 | 6 | 18 | 250 | 30±1, 40±2 | 0.5 | 10 | 1.8 | N&SMA | 2~4 |
QSDC-6000-18000-K35-40-D650S | 6 | 18 | 350 | 40±0.75 | 0.3 | 12 | 1.25 | WRD-650 ug SMA | 2~4 |
QSDC-6000-18000-K4-40-NS | 6 | 18 | 400 | 40±1 | 0.5 | 10 | 1.6 | SMA&N | 2~4 |
QSDC-6000-18200-30 | 6 | 18.2 | 30 | 6±1, 10±1, 30±1 | 1.2 | 12 | 1.5 | SMA | 2~4 |
QSDC-6000-26500-30 | 6 | 26.5 | 30 | 6±0.6, 10±0.6, 20±0.5, 30±0.7 | 2.3 | 13 | 1.5 | SMA | 2~4 |
QSDC-6000-40000-20 | 6 | 40 | 20 | 6±0.8, 10±0.7, 20±0.7, 30±0.7 | 2.6 | 10 | 1.7 | 2.92mm | 2~4 |
QSDC-6000-50000-20-10-2 | 6 | 50 | 20 | 10±0.8 | 1.9 | 8 | 1.8 | 2.4mm | 2~4 |
QSDC-6000-67000-12-10-V | 6 | 67 | 12 | 10±1.1 | 2.5 | 7 | 1.9 | 1.85mm | 2~4 |
QSDC-6100-7000-50-10-S | 6.1 | 7 | 50 | 10±0.15 | 0.5 | 20 | 1.2 | SMA | 2~4 |
QSDC-6500-11500-20-20-S | 6.5 | 11.5 | 20 | 20±1 | 1 | 12 | 1.5 | SMA | 2~4 |
QSDC-7000-7300-60-30-S | 7 | 7.3 | 60 | 30±1 | 0.5 | 16 | 1.5 | SMA | 2~4 |
QSDC-7000-12400-50 | 7 | 12.4 | 50 | 10±1, 20±1, 30±1 | 1 | 12 | 1.5 | SMA | 2~4 |
QSDC-8000-8400-20 | 8 | 8.4 | 20 | 10±1, 20±1 | 1 | 12 | 1.6 | N | 2~4 |
QSDC-8000-12000-40-15-S | 8 | 12 | 40 | 15±1 | 0.8 | 12 | 1.5 | SMA | 2~4 |
QSDC-8000-12000-K2-37.5-NS | 8 | 12 | 200 | 37.5±0.8 | 0.7 | 13 | 1.3 | N&SMA | 2~4 |
QSDC-8000-12400-K1-30-N | 8 | 12.4 | 100 | 30±1 | 0.4 | 10 | 1.4 | N | 2~4 |
QSDC-8000-18000-10-10-N | 8 | 18 | 10 | 10±1.2 | 1 | 12 | 1.5 | N | 2~4 |
QSDC-8000-18000-50-30-N | 8 | 18 | 50 | 30±1.8 | 0.6 | 12 | 1.5 | N | 2~4 |
QSDC-10750-12750-50 | 10.75 | 12.75 | 50 | 20±1, 30±1 | 0.6 | 15 | 1.4 | SMA | 2~4 |
QSDC-10900-13500-12-30-S | 10.9 | 13.5 | 12 | 30±1.2 | 0.6 | 17 | 17 | SMA | 2~4 |
QSDC-11900-18000-2K-40-62 | 11.9 | 18 | 2000 | 40±1 | 0.3 | 20 | 1.3 | WR-62(BJ140) | 2~4 |
QSDC-12000-13000-10-6-S | 12 | 13 | 10 | 6±1 | 0.8 | 12 | 1.5 | SMA | 2~4 |
QSDC-12000-18000-50-30-S | 12 | 18 | 50 | 30±1 | 1 | 12 | 1.5 | SMA | 2~4 |
QSDC-12400-18000-50 | 12.4 | 18 | 50 | 10±1, 20±1 | 0.8 | 12 | 1.4 | SMA | 2~4 |
QSDC-14000-15000-50 | 14 | 15 | 50 | 10±1, 20±1 | 0.6 | 15 | 1.4 | SMA | 2~4 |
QSDC-17000-22000-30-20-S | 17 | 22 | 30 | 20±1 | 1 | 14 | 1.5 | SMA | 2~4 |
QSDC-18000-26500-30-6-S | 18 | 26.5 | 30 | 6±0.5 | 2.3 | 14 | 1.5 | SMA | 2~4 |
QSDC-18000-31000-30-20-K | 18 | 31 | 30 | 20±1 | 1.4 | 12 | 1.6 | 2.92mm | 2~4 |
QSDC-18000-40000-20-6-K | 18 | 40 | 20 | 6±0.7 | 2.6 | 12 | 1.7 | 2.92mm | 2~4 |
QSDC-18000-40000-30 | 18 | 40 | 30 | 10±1, 20±1, 30±1 | 1.6 | 10 | 1.6 | 2.92mm | 2~4 |
QSDC-18000-50000-20 | 18 | 50 | 20 | 10±0.7, 20±0.8 | 1.8 | 8 | 1.8 | 2.4mm | 2~4 |
QSDC-18000-67000-12-10-V | 18 | 67 | 12 | 10±1 | 2.5 | 7 | 1.9 | 1.85mm | 2~4 |
QSDC-20000-50000-10 | 20 | 50 | 10 | 10±1.2, 20±1.2, 30±1.2 | 1.8 | 8 | 1.9 | 2.4mm | 2~4 |
QSDC-26000-30000-30 | 26 | 30 | 30 | 10±1, 20±1, 30±1 | 1.6 | 12 | 1.6 | 2.92mm | 2~4 |
QSDC-26000-40000-K1-30-28K | 26 | 40 | 100 | 30±1 | 0.3 | 25 | 1.1 | WR-28(BJ320)&2.92mm | 2~4 |
QSDC-26500-40000-20-6-K | 26.5 | 40 | 20 | 6±0.7 | 2.6 | 12 | 1.7 | 2.92mm | 2~4 |
QSDC-26500-67000-12-10-V | 26.5 | 67 | 12 | 10±1 | 2.5 | 7 | 1.9 | 1.85mm | 2~4 |
QSDC-40000-67000-12-10-V | 40 | 67 | 12 | 10±1 | 2.5 | 7 | 1.9 | 1.85mm | 2~4 |
QSDC-65000-86000-20-10-1 | 65 | 86 | 20 | 10±3 | 2 | 12 | 2.5 | 1.0mm | 2~4 |