Mga bahin:
- Broadband
- Gamay nga Laki
- Ubos nga Insertion Loss
Ang RF power divider/combiner kay kaylap nga gigamit sa wireless communication systems. Ang panguna nga gimbuhaton niini mao ang pagbahin sa usa ka signal sa input sa daghang mga signal sa output samtang gipadayon ang mga kinaiya sa orihinal nga signal, o pag-synthesize ang daghang mga signal sa input sa usa ka output. Alang sa usa ka matang sa passive power divider, ang prinsipyo sa disenyo sa usa ka 8-way power divider/combiner mao ang paghimo ug branch network gamit ang microstrip branch lines, ug gamiton ang quarter wavelength microstrip transmission lines alang sa impedance matching, aron ang impedance sa matag pantalan mao ang katumbas sa 50 ohms. Samtang nagsanga, nakab-ot ang labing kataas nga kahusayan sa pagpasa sa enerhiya.
1. Kung mogamit ug 8-way power divider/combiner isip power divider, adunay 1 input port ug 8 output ports; Kung gigamit ingon usa ka combiner, adunay 8 input port ug 1 output port.
2. Pagbaton og electrical nga mga kinaiya sama sa lapad nga operating frequency, ubos nga pagsal-ot nga pagkawala, taas nga ganansya ug pag-inusara.
3. Hingkod nga teknolohiya ug lig-on nga pasundayag. Aron makunhuran ang kahusayan sa transmission tungod sa pagpamalandong sa signal, nagpahigayon kami nga disenyo sa impedance matching ug gi-optimize ang port standing wave ratio; Aron makunhuran ang pagpamalandong sa signal tungod sa mga epekto sa pagbalhin, pagbalhin gikan sa mga coaxial connectors ngadto sa mga linya sa microstrip; Aron mapalapad ang bandwidth ug mamentinar ang ubos nga standing wave ratio, pagpalambo sa impedance matching nga disenyo sa sanga; Aron malikayan ang resonance sa sulod sa operating frequency range, i-optimize ang istruktura sa lungag.
Ang 8-way power splitters/combiners adunay daghang aplikasyon sa RF field, naghatag ug signal para sa testing, synthesizing feed ngadto ug gikan sa mga antenna, pagbahin sa mga signal nga napasa na ug nadawat sa mga linya sa telepono, ug lain-laing mga katuyoan.
Ang Qualwave inc. paghatag og 8-way power splitters/combiners nga adunay frequency range nga DC~67GHz, gahum nga hangtod sa 600W, maximum insertion loss nga 23dB, ug minimum isolation sa 6dB. Nagtanyag kami og nagkalain-laing mga opsyon sa connector sama sa SMA, N, TNC, N&SMA, 2.4mm, 2.92mm, ug uban pa. Ang among mga produkto kaylap nga gigamit ug gidayeg sa daghang natad.
Numero sa Bahin | Frequency sa RF(GHz, Min.) | Frequency sa RF(GHz, Max.) | Gahum isip Divider(W) | Gahum isip Combiner(W) | Pagkawala sa Pagsal-ot(dB, Max.) | Paglain(dB, Min.) | Balanse sa Amplitude(±dB,Max.) | Balanse sa Yugto(±°, Max.) | VSWR(Max.) | Mga konektor | Panahon sa Pagpangulo(Semana) |
---|---|---|---|---|---|---|---|---|---|---|---|
QPD8-0-2000-2 | DC | 2 | 2 | - | 19 | 17.5 | ± 0.5 | ±1 | 1.25 | N, TNC | 2~3 |
QPD8-0-2000-2-S | DC | 2 | 2 | - | 19 | 17.5 | 0.3 | ±3 | 1.15 | SMA | 2~3 |
QPD8-0-3000-2-S | DC | 3 | 2 | - | 18±1.5 | 18 | ±1.0 | - | 1.3 | SMA | 2~3 |
QPD8-0-3000-2-N | DC | 3 | 2 | - | 19.5 | 18.5 | ± 0.5 | ±2 | 1.3 | N | 2~3 |
QPD8-0-4000-2-S | DC | 4 | 2 | - | 19.5 | 17 | 0.8 | ±8 | 1.4 | SMA | 2~3 |
QPD8-0-6000-2-S | DC | 6 | 2 | - | 18±2.5 | 18 | ± 1.2 | - | 1.5 | SMA | 2~3 |
QPD8-0-8000-2 | DC | 8 | 2 | - | ±2(tip.) | 16 | ±5 | ± 90 | 1.9 | SMA, N | 2~3 |
QPD8-0-10000-R5-S | DC | 10 | 0.5 | - | 18±2.8 | - | ±2 | - | 1.6 | SMA | 2~3 |
QPD8-0-18000-1-S | DC | 18 | 1 | - | 23 | 10 | ± 1.2 | - | 2.5 | SMA | 2~3 |
QPD8-0-26500-2-S | DC | 26.5 | 2 | - | 3 | 18 | 2 | 2 | 1.6 | SMA | 2~3 |
QPD8-0-40000-2-K | DC | 40 | 2 | - | 4 | 18 | 2 | 2 | 1.6 | 2.92mm | 2~3 |
QPD8-2-250-1-S | 0.002 | 0.25 | 1 | - | 1 | 25 | ± 0.2 | ±2 | 1.3 | SMA | 2~3 |
QPD8-5-500-10-N | 0.005 | 0.5 | 10 | - | 1.5 | 20 | 0.3 | ±5 | 1.25 | N | 2~3 |
QPD8-5-1000-1-S | 0.005 | 1 | 1 | 0.25 | 3 | 18 | 0.5 | ±5 | 1.3 | SMA | 2~3 |
QPD8-5-1000-50-S | 0.005 | 1 | 50 | 50 | 1.6 | 12 | ± 0.2 | ±5 | 1.5 | SMA | 2~3 |
QPD8-5-2000-1-S | 0.005 | 2 | 1 | 1 | 5 | 15 | ± 0.5 | ±5 | 1.8 | SMA | 2~3 |
QPD8-10-100-1-S | 0.01 | 0.1 | 1 | 0.5 | 1 | 20 | 0.4 | ± 4 | 1.3 | SMA | 2~3 |
QPD8-20-100-K15-S | 0.02 | 0.1 | 150 | 150 | 1.3 | 20 | 0.2 | ±5 | 1.5 | SMA | 2~3 |
QPD8-20-520-K2-S | 0.02 | 0.52 | 200 | 200 | 1 | 12 | 0.5 | 5 | 1.6 | SMA | 2~3 |
QPD8-30-500-K1-N | 0.03 | 0.5 | 100 | 100 | 0.75 | 20 | 0.3 | ±5 | 1.4 | N | 2~3 |
QPD8-30-3000-2-S | 0.03 | 3 | 2 | - | 18.5 | 17 | 0.5 | ±5 | 1.3 | SMA | 2~3 |
QPD8-70-500-K15-S | 0.07 | 0.5 | 150 | 150 | 1 | 12 | 0.2 | 3 | 1.5 | SMA | 2~3 |
QPD8-70-1010-K6-NS | 0.07 | 1.01 | 600 | 600 | 1.8 | 8 | 0.3 | 5 | 1.5 | SMA&N | 2~3 |
QPD8-80-500-30-S | 0.08 | 0.5 | 30 | 2 | 1.8 | 18 | ± 0.2 | ±3 | 1.3 | SMA | 2~3 |
QPD8-80-1000-K2-S | 0.08 | 1 | 200 | 200 | 1.3 | 15 | ± 0.2 | ±5 | 1.35 | SMA | 2~3 |
QPD8-80-4000-30-S | 0.08 | 4 | 30 | 2 | 6.6 | 13 | 0.4 | ±8 | 1.55 | SMA | 2~3 |
QPD8-98-102-30-N | 0.098 | 0.102 | 30 | 2 | 0.8 | 20 | 0.2 | ±3 | 1.2 | N | 2~3 |
QPD8-100-700-1-S | 0.1 | 0.7 | 1 | 0.5 | 2 | 18 | 0.4 | ±8 | 1.5 | SMA | 2~3 |
QPD8-100-700-30-S | 0.1 | 0.7 | 30 | 2 | 2 | 20 | 0.3 | ±3 | 1.25 | SMA | 2~3 |
QPD8-100-2000-30-S | 0.1 | 2 | 30 | 2 | 3.4 | 18 | 0.3 | ± 4 | 1.35 | SMA | 2~3 |
QPD8-100-3000-30-S | 0.1 | 3 | 30 | 2 | 6.5 | 18 | 0.3 | ± 6 | 1.35 | SMA | 2~3 |
QPD8-100-4000-30-SMS | 0.1 | 4 | 30 | 2 | 6.5 | 12 | 0.5 | ± 6 | 1.55 | SMA | 2~3 |
QPD8-108-138-50-N | 0.108 | 0.138 | 50 | 50 | 0.8 | 15 | 0.2 | ± 4 | 1.25 | SMA | 2~3 |
QPD8-200-1000-30-S | 0.2 | 1 | 30 | 2 | 1.4 | 20 | 0.4 | ± 4 | 1.25 | SMA | 2~3 |
QPD8-200-1000-K1-S | 0.2 | 1 | 100 | 10 | 1 | 20 | ± 0.3 | ± 4 | 1.25 | SMA | 2~3 |
QPD8-200-2000-30-S | 0.2 | 2 | 30 | 2 | 2.8 | 18 | 0.3 | ± 4 | 1.3 | SMA | 2~3 |
QPD8-200-2300-30-S | 0.2 | 2.3 | 30 | 2 | 3 | 18 | 0.3 | ± 4 | 1.3 | SMA | 2~3 |
QPD8-200-6000-30-S | 0.2 | 6 | 30 | 2 | 6.8 | 17 | 0.5 | ±5 | 1.35 | SMA | 2~3 |
QPD8-223-235-30-S | 0.223 | 0.235 | 30 | 2 | 1.2 | 20 | 0.4 | ± 4 | 1.3 | SMA | 2~3 |
QPD8-240-30-S | 0.24 | 30 | 2 | 0.6 | 20 | ± 0.2 | ±2 | 1.2 | SMA | 2~3 | |
QPD8-300-500-30-S | 0.3 | 0.5 | 30 | 2 | 0.8 | 20 | 0.2 | ±3 | 1.25 | SMA | 2~3 |
QPD8-300-3000-30-NS | 0.3 | 3 | 30 | 2 | 2.6 | 20 | 0.3 | ± 4 | 1.3 | SMA&N | 2~3 |
QPD8-300-6000-30-S | 0.3 | 6 | 30 | 2 | 4.8 | 20 | 0.3 | ± 6 | 1.4 | SMA | 2~3 |
QPD8-300-18000-20-S | 0.3 | 18 | 20 | 1 | 5 | 7 | ± 0.5 | ±8 | 2.3 | SMA | 2~3 |
QPD8-400-900-30-B | 0.4 | 0.9 | 30 | 2 | 0.6 | 20 | 0.3 | ±3 | 1.25 | Ang BNC | 2~3 |
QPD8-400-4000-30-N | 0.4 | 4 | 30 | 2 | 2.4 | 20 | 0.4 | ± 4 | 1.35 | N | 2~3 |
QPD8-400-6000-30-S | 0.4 | 6 | 30 | 2 | 3.6 | 20 | 0.4 | ±5 | 1.35 | SMA | 2~3 |
QPD8-450-6000-30-S | 0.45 | 6 | 30 | 2 | 3.2 | 18 | 0.3 | ± 4 | 1.35 | SMA | 2~3 |
QPD8-470-510-10-S | 0.47 | 0.51 | 10 | - | 2 | 20 | ± 0.5 | ±5 | 1.3 | SMA | 2~3 |
QPD8-470-510-20-S | 0.47 | 0.51 | 20 | - | 1.5 | 20 | ± 0.5 | ±5 | 1.3 | SMA | 2~3 |
QPD8-500-2000-30-S | 0.5 | 2 | 30 | 2 | 1.5 | 20 | 0.4 | ± 4 | 1.3 | SMA | 2~3 |
QPD8-500-3000-30 | 0.5 | 3 | 30 | 2 | 1.8 | 20 | ± 0.3 | ± 4 | 1.3 | SMA, N | 2~3 |
QPD8-500-4000-30-NS | 0.5 | 4 | 30 | 2 | 2 | 20 | 0.3 | ± 4 | 1.3 | SMA&N | 2~3 |
QPD8-500-4000-30-S | 0.5 | 4 | 30 | 2 | 2.3 | 20 | 0.2 | ± 4 | 1.3 | SMA | 2~3 |
QPD8-500-6000-30 | 0.5 | 6 | 30 | 2 | 3 | 20 | ± 0.2 | ± 6 | 1.4 | SMA, N | 2~3 |
QPD8-500-8000-20 | 0.5 | 8 | 20 | 1 | 4 | 18 | 0.4 | ±5 | 1.5 | SMA, N | 2~3 |
QPD8-500-18000-20-S | 0.5 | 18 | 20 | 1 | 6 | 14 | 0.8 | ± 10 | 2 | SMA | 2~3 |
QPD8-500-26500-30-S | 0.5 | 26.5 | 30 | 2 | 8 | 18 | ± 0.5 | ± 10 | 1.6 | SMA | 2~3 |
QPD8-500-40000-20-K | 0.5 | 40 | 20 | 2 | 11 | 15 | ± 0.8 | ± 12 | 1.8 | 2.92mm | 2~3 |
QPD8-600-2000-30-S | 0.6 | 2 | 30 | 2 | 1 | 20 | 0.3 | ± 4 | 1.25 | SMA | 2~3 |
QPD8-600-6000-30 | 0.6 | 6 | 30 | 2 | 2.8 | 18 | 0.4 | ±5 | 1.4 | SMA, N | 2~3 |
QPD8-600-8000-30-S | 0.6 | 8 | 30 | 2 | 3.6 | 20 | 0.4 | ±5 | 1.4 | SMA | 2~3 |
QPD8-700-3000-30 | 0.7 | 3 | 30 | 2 | 1.2 | 20 | ± 0.2 | ±2 | 1.3 | SMA, N | 2~3 |
QPD8-700-4000-30-N | 0.7 | 4 | 30 | 2 | 1.8 | 20 | ± 0.4 | ± 4 | 1.3 | N | 2~3 |
QPD8-750-1710-30-S | 0.75 | 1.71 | 30 | 2 | 0.6 | 20 | 0.3 | ±3 | 1.2 | SMA | 2~3 |
QPD8-800-2000-30-S | 0.8 | 2 | 30 | 2 | 1 | 20 | 0.3 | ± 4 | 1.25 | SMA | 2~3 |
QPD8-800-2500-30-N | 0.8 | 2.5 | 30 | 2 | 1.4 | 20 | 0.4 | ± 4 | 1.25 | N | 2~3 |
QPD8-800-2700-30-N | 0.8 | 2.7 | 30 | 2 | 1.5 | 20 | 0.4 | ± 4 | 1.3 | N | 2~3 |
QPD8-800-4200-30-S | 0.8 | 4.2 | 30 | 2 | 1.8 | 20 | 0.4 | ± 4 | 1.4 | SMA | 2~3 |
QPD8-800-4200-K2-NS | 0.8 | 4.2 | 200 | - | 1.2 | 6 | 0.25 | ±7 | 1.3 | SMA&N | 2~3 |
QPD8-800-5000-20-S | 0.8 | 5 | 20 | 1 | 1.5 | 20 | ± 0.4 | ±3 | 1.4 | SMA | 2~3 |
QPD8-800-6000-20-S | 0.8 | 6 | 20 | 2 | 2 | 20 | 0.4 | ±5 | 1.35 | SMA | 2~3 |
QPD8-800-8000-30-S | 0.8 | 8 | 30 | 2 | 3.6 | 20 | 0.4 | ±5 | 1.4 | SMA | 2~3 |
QPD8-870-1005-K3-N | 0.87 | 1.005 | 300 | 300 | 0.6 | 18 | 0.2 | 3 | 1.3 | N | 2~3 |
QPD8-950-2150-30 | 0.95 | 2.15 | 30 | 2 | 3 | 20 | 0.4 | ± 4 | 1.25 | SMA, N, TNC, N&SMA | 2~3 |
QPD8-950-2150-30-S-DC | 0.95 | 2.15 | 30 | 1 | 0.6 | 20 | 0.3 | ±3 | 1.25 | SMA | 2~3 |
QPD8-1000-1700-30-S | 1 | 1.7 | 30 | 2 | 0.8 | 22 | ± 0.4 | ± 4 | 1.25 | SMA | 2~3 |
QPD8-1000-2000-K2-NS | 1 | 2 | 200 | 200 | 0.5 | 12 | 0.5 | 5 | 1.5 | SMA&N | 2~3 |
QPD8-1000-2500-K2-S | 1 | 2.5 | 200 | 200 | 0.9 | 16 | 0.3 | 5 | 1.5 | SMA | 2~3 |
QPD8-1000-2500-K2-NS | 1 | 2.5 | 200 | - | 0.5 | 8 | ± 0.3 | ± 4 | 1.4 | SMA&N | 2~3 |
QPD8-1000-2500-K3-NS | 1 | 2.5 | 300 | 300 | 0.7 | - | 0.5 | 8 | 1.5 | SMA&N | 2~3 |
QPD8-1000-3000-30-S | 1 | 3 | 30 | 2 | 1 | 18 | 0.3 | ± 4 | 1.3 | SMA | 2~3 |
QPD8-1000-6000-30 | 1 | 6 | 30 | 2 | 2.1 | 20 | 0.2 | ± 4 | 1.25 | SMA, SMP | 2~3 |
QPD8-1000-8000-K1-S | 1 | 8 | 100 | 100 | 1.8 | 20 | 0.4 | 3 | 1.5 | SMA | 2~3 |
QPD8-1000-18000-20-S | 1 | 18 | 20 | 1 | 4 | 15 | ± 0.5 | ± 10 | 1.8 | SMA | 2~3 |
QPD8-1000-26500-30-S | 1 | 26.5 | 30 | 2 | 5.4 | 18 | ± 0.5 | ±7 | 1.6 | SMA | 2~3 |
QPD8-1000-40000-20-K | 1 | 40 | 20 | 2 | 7.3 | 18 | ± 0.7 | ± 11 | 1.7 | 2.92mm | 2~3 |
QPD8-1000-50000-20-2 | 1 | 50 | 20 | 2 | 9.2 | 18 | ± 0.9 | ± 14 | 1.8 | 2.4mm | 2~3 |
QPD8-1100-1700-30-T | 1.1 | 1.7 | 30 | 2 | 0.8 | 22 | 0.3 | ±3 | 1.25 | Ang TNC | 2~3 |
QPD8-1270-1460-K8-NS | 1.27 | 1.46 | 800 | 800 | 0.5 | 14 | 0.2 | 3 | 1.5 | SMA&N | 2~3 |
QPD8-1270-1460-1K12-EN | 1.27 | 1.46 | 1120 | 1120 | 0.5 | 14 | 0.2 | 3 | 1.5 | SC&N | 2~3 |
QPD8-1370-30-S | 1.37 | 30 | 2 | 0.8 | 20 | 0.2 | ±3 | 1.2 | SMA | 2~3 | |
QPD8-1500-1700-20-S | 1.5 | 1.7 | 20 | 1 | 0.3 | 20 | ± 0.2 | ± 4 | 1.25 | SMA | 2~3 |
QPD8-1500-5000-30-S | 1.5 | 5 | 30 | 2 | 1.2 | 20 | ± 0.2 | ±2 | 1.3 | SMA | 2~3 |
QPD8-1525-1850-K1-N | 1.525 | 1.85 | 100 | 10 | 0.8 | 18 | 0.3 | ± 4 | 1.2 | N | 2~3 |
QPD8-1805-1880-K2-S | 1.805 | 1.88 | 200 | 200 | 0.9 | 18 | 0.2 | 4 | 1.4 | SMA | 2~3 |
QPD8-1850-2700-K25-N | 1.85 | 2.7 | 250 | 15 | 0.8 | 18 | 0.4 | ± 4 | 1.3 | N | 2~3 |
QPD8-2000-4000-K16-S | 2 | 4 | 160 | - | 0.9 | 18 | 0.3 | 5 | 1.5 | SMA | 2~3 |
QPD8-2000-6000-30 | 2 | 6 | 30 | 2 | 1.2 | 18 | 0.4 | ± 4 | 1.3 | SMA, N | 2~3 |
QPD8-2000-6000-K65-7N | 2 | 6 | 650 | 650 | 0.8 | - | 0.4 | 10 | 1.6 | 7/16 DIN&N | 2~3 |
QPD8-2000-8000-30-S | 2 | 8 | 30 | 2 | 1.5 | 20 | 0.4 | ±3 | 1.35 | SMA | 2~3 |
QPD8-2000-10000-30-S | 2 | 10 | 30 | 2 | 2 | 18 | ± 0.4 | ± 4 | 1.4 | SMA | 2~3 |
QPD8-2000-18000-20-S | 2 | 18 | 20 | 1 | 3.2 | 16 | 0.5 | ± 10 | 1.6 | SMA | 2~3 |
QPD8-2000-26500-20 | 2 | 26.5 | 20 | 1 | 3.2 | 16 | ± 0.8 | ± 10 | 1.9 | SMA, 2.92mm | 2~3 |
QPD8-2000-40000-20-K | 2 | 40 | 20 | 2 | 5.9 | 18 | ± 0.7 | ± 10 | 1.7 | 2.92mm | 2~3 |
QPD8-2000-50000-20-2 | 2 | 50 | 20 | 1 | 7.2 | 18 | ± 0.8 | ± 12 | 1.8 | 2.4mm | 2~3 |
QPD8-2400-6000-30-S | 2.4 | 6 | 30 | 2 | 1.5 | 20 | 0.4 | ± 4 | 1.35 | SMA | 2~3 |
QPD8-2700-3100-K2-S | 2.7 | 3.1 | 200 | - | 0.9 | 18 | 0.3 | ±5 | 1.5 | SMA | 2~3 |
QPD8-3000-13000-20-S | 3 | 13 | 20 | 1 | 2 | 18 | ± 0.4 | ± 6 | 1.4 | SMA | 2~3 |
QPD8-4000-6000-30-S | 4 | 6 | 30 | 2 | 1.2 | 18 | ± 0.4 | ± 4 | 1.4 | SMA | 2~3 |
QPD8-4000-8000-30-S | 4 | 8 | 30 | 2 | 0.8 | 18 | ± 0.3 | ±5 | 1.35 | SMA | 2~3 |
QPD8-4000-12000-20-S | 4 | 12 | 20 | 1 | 1.5 | 18 | 0.2 | ± 4 | 1.5 | SMA | 2~3 |
QPD8-4000-18000-30-S | 4 | 18 | 30 | 1 | 1.8 | 16 | ± 0.5 | ± 6 | 1.8 | SMA | 2~3 |
QPD8-4900-5900-30-S | 4.9 | 5.9 | 30 | 2 | 0.8 | 20 | 0.3 | ±3 | 1.3 | SMA | 2~3 |
QPD8-5000-12000-20-S | 5 | 12 | 20 | 1 | 1.2 | 18 | 0.5 | ±5 | 1.4 | SMA | 2~3 |
QPD8-5800-6500-K1-S | 5.8 | 6.5 | 100 | 100 | 0.9 | 18 | 0.3 | 5 | 1.5 | SMA | 2~3 |
QPD8-6000-6500-K15-S | 6 | 6.5 | 150 | 150 | 1 | 17 | 0.5 | 5 | 1.5 | SMA | 2~3 |
QPD8-6000-10000-K15-NS | 6 | 10 | 150 | 150 | 1 | - | 0.5 | 10 | 1.8 | SMA&N | 2~3 |
QPD8-6000-12000-20-SM | 6 | 12 | 20 | 1 | 1.5 | 18 | 0.4 | ±5 | 1.5 | SMA | 2~3 |
QPD8-6000-18000-50-S | 6 | 18 | 50 | - | 2.4 | 17 | ± 0.5 | ±8 | 1.8 | SMA | 2~3 |
QPD8-6000-18000-50-SMS | 6 | 18 | 50 | - | 2.4 | 17 | ± 0.5 | ±8 | 1.8 | SMA | 2~3 |
QPD8-6000-18000-K1-S | 6 | 18 | 100 | - | 2.4 | 15 | ± 0.5 | ±8 | 1.8 | SMA | 2~3 |
QPD8-6000-18000-K3-S | 6 | 18 | 300 | 300 | 1.8 | 17 | 0.5 | 5 | 1.75 | SMA | 2~3 |
QPD8-6000-26500-30-S | 6 | 26.5 | 30 | 2 | 2.9 | 18 | ± 0.5 | ± 6 | 1.6 | SMA | 2~3 |
QPD8-6000-40000-20-K | 6 | 40 | 20 | 1 | 3.2 | 15 | ± 0.5 | ±8 | 2.2 | 2.92mm | 2~3 |
QPD8-7130-7245-K1-S | 7.13 | 7.245 | 100 | 100 | 0.9 | 18 | 0.3 | 5 | 1.5 | SMA | 2~3 |
QPD8-8000-9000-K1-S | 8 | 9 | 100 | - | 1.5 | 18 | ± 0.5 | ±5 | 1.35 | SMA | 2~3 |
QPD8-8000-12000-20-S | 8 | 12 | 20 | 1 | 1.4 | 18 | 0.4 | ±5 | 1.4 | SMA | 2~3 |
QPD8-9000-11000-20-S | 9 | 11 | 20 | 1 | 1.2 | 18 | 0.4 | ±5 | 1.4 | SMA | 2~3 |
QPD8-9000-45000-R1-2 | 9 | 45 | 0.1 | - | 7 | 15 | ±1 | ±20 | 1.4 | 2.4mm | 2~3 |
QPD8-17000-31000-20-K | 17 | 31 | 20 | 1 | 2 | 16 | ± 0.5 | ± 6 | 1.6 | 2.92mm | 2~3 |
QPD8-18000-26500-20-K | 18 | 26.5 | 20 | 1 | 1.8 | 16 | ± 0.5 | ± 6 | 1.6 | 2.92mm | 2~3 |
QPD8-18000-40000-20-K | 18 | 40 | 20 | 1 | 3.2 | 16 | ± 0.5 | ±8 | 1.7 | 2.92mm | 2~3 |
QPD8-18000-40000-30-K | 18 | 40 | 30 | 1 | 3.6 | 15 | ±0.6 | ± 6 | 1.7 | 2.92mm | 2~3 |
QPD8-18000-50000-20-2 | 18 | 50 | 20 | 1 | 4.2 | 18 | ± 0.8 | ± 10 | 1.8 | 2.4mm | 2~3 |
QPD8-18000-50000-20-2-1 | 18 | 50 | 20 | - | 2.5 | 20 | 0.5 | 8 | 1.6 | 2.4mm | 2~3 |
QPD8-24000-44000-20-2 | 24 | 44 | 20 | 1 | 3.6 | 18 | ±0.6 | ±8 | 1.7 | 2.4mm | 2~3 |
QPD8-26500-40000-20-K | 26.5 | 40 | 20 | 2 | 3 | 18 | ± 0.5 | ±8 | 1.6 | 2.92mm | 2~3 |
QPD8-26500-50000-20-2 | 26.5 | 50 | 20 | 1 | 4.2 | 18 | ± 0.8 | ± 10 | 1.8 | 2.4mm | 2~3 |
QPD8-27000-32000-20-K | 27 | 32 | 20 | 1 | 1.8 | 18 | ± 0.5 | ±8 | 1.5 | 2.92mm | 2~3 |
QPD8-35350-36150-20-K | 35.35 | 36.15 | 20 | 1 | 1.8 | 18 | ± 0.5 | ±8 | 1.5 | 2.92mm | 2~3 |
QPD8-37450-39350-10-K | 37.45~39.35 | 10 | 1 | 2.4 | 15 | ±0.6 | ± 6 | 1.6 | 2.92mm | 2~3 | |
QPD8-40000-67000-12-V | 40 | 67 | 12 | 1 | 5.9 | 16 | ±1 | ± 12 | 1.9 | 1.85mm | 2~3 |
QPD8-50000-66000-R1 | 50 | 66 | 0.1 | - | 6 | 15 | ±1 | ±20 | 1.4 | - | 2~3 |