English
panid_banner (1)
panid_banner (2)
panid_banner (3)
panid_banner (4)
panid_banner (5)
  • 4 Way Power Dividers／ Combiners RF Microwave Millimeter High Power Microstrip Resistive Broadband
  • 4 Way Power Dividers／ Combiners RF Microwave Millimeter High Power Microstrip Resistive Broadband
  • 4 Way Power Dividers／ Combiners RF Microwave Millimeter High Power Microstrip Resistive Broadband

    • 4 Way Power Dividers／ Combiners RF Microwave Millimeter High Power Microstrip Resistive Broadband

    Mga Kinaiya:

    • Broadband
    • Gamay nga Gidak-on
    • Ubos nga Pagkawala sa Pagsal-ot

    Mga Aplikasyon:

    • Mga Amplifier
    • Mga Mixer
    • Mga antena
    • Pagsulay sa Laboratoryo

    Ang 4-way power divider nagbahin

    Ang 4-way power divider nagbahin sa input signal ngadto sa upat ka parehas nga power output, nga adunay parehas nga amplitude ug phase difference nga 0°. Subay niini, ang usa ka 4-way combiner makahiusa sa mga signal gikan sa upat ka input port ngadto sa usa ka output port.
    Makahatag kami og 4-way RF power divider/combiner, 4-way microwave power divider/combiner, 4-way millimeter wave power divider/combiner, 4-way high power divider/combiner, 4-way microstrip power divider/combiner, 4-way resistor power divider/combiner, ug 4-way broadband power divider/combiner.

    Ang 4-way power divider/combiner adunay mosunod nga mga kinaiya:

    1. Alokasyon ug sintesis sa gahum: Ang 4-way power splitters mahimong parehas nga moapod-apod sa input power ngadto sa 4 ka output port, nga magmintinar sa balanse sa output power; Ang 4-way logic converter naghiusa sa upat ka signal ngadto sa usa.
    2. Taas nga isolation: Ang power divider epektibong maka-isolate sa lain-laing signal channels ug makapakunhod sa mutual interference tali sa mga signal.
    3. Performance sa Wideband: Uban sa broadband nga mga kinaiya, angay alang sa wireless nga mga sistema sa komunikasyon sa lain-laing mga frequency band.
    4. Ubos nga insertion loss: Atol sa proseso sa pag-apod-apod sa signal, ang power divider adunay ubos nga insertion loss, nga nagpamenos sa signal attenuation.

    Ang 4-way power divider/combiner gigamit sa mosunod nga mga aspeto:

    1. Alokasyon sa network: Ang 4-way power splitter kasagarang gigamit sa pag-allocate sa mga signal ngadto sa daghang mga receiving device, sama sa mga antenna distributor sa mga wireless communication system.
    2. Sistema sa antenna: Ang power divider mahimong parehas nga moapod-apod sa input signal ngadto sa daghang antenna, nga makapauswag sa coverage range ug kalidad sa pagdawat sa signal.
    3. Pagsulay sa signal: Ang power divider mahimong gamiton sa pag-allocate sa mga input signal sa lain-laing kagamitan sa pagsulay para sa multi-channel signal testing, nga makapauswag sa efficiency sa pagsulay.
    4. Base station sa komunikasyon: Ang power divider adunay papel sa pag-apod-apod ug pag-inusara sa signal sa base station sa komunikasyon, nga nagsiguro sa lig-on nga transmission sa signal.

    QualwaveNaghatag kini og 4-way power divider/combiner nga adunay mga frequency gikan sa DC hangtod sa 67GHz, nga adunay gahum nga hangtod sa 50000W ug taas nga insertion loss reliability. Kini adunay daghang mga konektor sama sa SMA, N, 1.85mm, 1.92mm, BNC, ug uban pa, nga adunay halapad nga operating temperature range ug lig-on nga performance. Ang among 4-way power divider/combiner kay kaylap nga gigamit sa daghang mga lugar. Ang produkto adunay lead time nga 2-3 ka semana, ug ang mga kustomer gidapit sa pag-order.

    img_08
    img_08

    Numero sa Bahin

    Kadaghanon sa RF

    (GHz, Min.)

    xiaoyudengyu

    Kadaghanon sa RF

    (GHz, Max.)

    dayudengyu

    Gahum isip Tigbahin

    (K)

    dengyu

    Gahom isip Tighiusa

    (K)

    dengyu

    Pagkawala sa Pagsal-ot

    (dB, Max.)

    xiaoyudengyu

    Paglain

    (dB, Min.)

    dayudengyu

    Balanse sa Amplitude

    (±dB, Max.)

    xiaoyudengyu

    Balanse sa Hugna

    (±°, Max.)

    xiaoyudengyu

    VSWR

    (Max.)

    xiaoyudengyu

    Mga konektor

    Oras sa Pagpanguna

    (Mga Semana)
    QPD4-0-8000-2 DC 8 2 - 1.2 12(tipikal) 0.5 25 1.35 SMA, N 2~3
    QPD4-0-18000-R5-S DC 18 0.5 - 2.0 5.5 1.0 8 1.8 SMA 2~3
    QPD4-0-26500-2-S DC 26.5 2 - 6(tipikal) 12(tipikal) - - 2 SMA 2~3
    QPD4-0-40000-2-K DC 40 2 - 1.5(tipikal) 12(tipikal) - - 1.8 2.92mm 2~3
    QPD4-0-50000-2-2 DC 50 2 - 6(tipikal) 12(tipikal) - - 2 2.4mm 2~3
    QPD4-0-67000-2-V DC 67 2 - 6(tipikal) 12(tipikal) - - 2 1.85mm 2~3
    QPD4-0.009-10-K8-N 9K 0.01 800 800 0.3 20 0.15 3 1.3 N 2~3
    QPD4-0.009-10-1K2-N 9K 0.01 1200 1200 0.3 20 0.15 3 1.3 N 2~3
    QPD4-0.009-100-2K-N 9K 0.1 2000 2000 0.6 17 0.15 3 2 N 2~3
    QPD4-0.009-100-4K-7N 9K 0.1 4000 4000 0.6 15 0.15 3 1.4 7/16 DIN (L29)&N 2~3
    QPD4-0.009-100-4K-7N-1 9K 0.1 4000 4000 0.4 12 0.1 3 1.3 7/16 DIN (L29)&N 2~3
    QPD4-0.009-100-5K-A1N 9K 0.1 5000 5000 0.6 15 0.15 3 1.4 1-5/8″ (IF70)&N 2~3
    QPD4-0.009-100-10K-A1N 9K 0.1 10000 10000 0.6 15 0.15 3 1.4 1-5/8″ (IF70)&N 2~3
    QPD4-0.009-250-50-S 9K 0.25 50 - 0.5 18 0.15 4 1.4 SMA 2~3
    QPD4-0.01-10-K2-N 10K 0.01 200 200 0.3 20 0.15 3 1.3 N 2~3
    QPD4-0.01-10-1K5-N 10K 0.01 1500 1500 0.3 20 0.15 3 1.3 N 2~3
    QPD4-0.01-40-K2-N 10K 0.04 200 200 0.4 20 0.1 3 1.4 N 2~3
    QPD4-0.01-40-K5-N 10K 0.04 500 500 0.4 20 1.15 3 1.2 N 2~3
    QPD4-0.01-40-1K-N 10K 0.04 1000 1000 0.4 20 0.1 3 1.5 N 2~3
    QPD4-0.01-40-2K-N 10K 0.04 2000 2000 0.4 20 0.15 3 1.5 N 2~3
    QPD4-0.01-100-K2-S 10K 0.1 200 200 0.75 15 0.15 3 2.3 SMA 2~3
    QPD4-0.01-100-1K-N 10K 0.1 1000 1000 0.5 18 0.1 3 1.4 N 2~3
    QPD4-0.1-400-K4-N 0.0001 0.4 400 400 0.8 15 0.1 6 1.4 N 2~3
    QPD4-0.5-50-1K-N 0.0005 0.05 1000 - 0.35 20 - - 1.3 N 2~3
    QPD4-2.2-27-10-S 0.0022 0.027 10 - 0.3 20 0.1 3 1.15 SMA 2~3
    QPD4-2.3-27-K2-S 0.0023 0.027 200 200 0.3 20 0.1 3 1.15 SMA 2~3
    QPD4-2.3-27-2K5-7N 0.0023 0.027 2500 2500 0.3 20 0.1 3 1.15 7/16 DIN (L29)&N 2~3
    QPD4-3-30-K2-S 0.003 0.03 200 200 0.3 18 0.15 3 1.3 SMA 2~3
    QPD4-3-30-2K-N 0.003 0.03 2000 2000 0.35 20 - - 1.25 N 2~3
    QPD4-3-30-2K5-N 0.003 0.03 2500 2500 0.3 20 0.15 3 1.3 N 2~3
    QPD4-4-30-3K-N 0.004 0.03 3000 3000 0.35 20 - - 1.25 N 2~3
    QPD4-4-30-20K-NA1 0.004 0.03 20000 20000 0.5 20 - - 1.4 N,1-5/8″ (IF70) 2~3
    QPD4-5-30-50K-A1A2 0.005 0.03 50000 50000 0.5 20 - - 1.45 1-5/8″ (IF70), 3-1/8″ (IF110) 2~3
    QPD4-5-1000-1 0.005 1 1 0.5 2 16 0.2 1 1.5 SMA, N, TNC, SMP 2~3
    QPD4-10-100-R5 0.01 0.1 0.5 0.375 1.5 18 0.6 4 1.4 SMA, BNC 2~3
    QPD4-10-100-K5-N 0.01 0.1 500 500 0.6 15 0.15 3 1.4 N 2~3
    QPD4-10-100-3K5-7N 0.01 0.1 3500 3500 0.6 15 0.15 3 1.4 7/16 DIN (L29)&N 2~3
    QPD4-10-200-2K5-7N 0.01 0.2 2500 2500 0.5 10 0.2 2 1.25 7/16 DIN (L29)&N 2~3
    QPD4-10-500-20-S 0.01 0.5 20 - 1.2 20 0.4 4 1.4 SMA 2~3
    QPD4-10-500-K1-S 0.01 0.5 100 - 0.7 12 0.2 5 1.6 SMA 2~3
    QPD4-10-520-2K5-7N 0.01 0.52 2500 2500 0.8 6 0.3 5 1.35 7/16 DIN (L29)&N 2~3
    QPD4-10-520-2K5-EN 0.01 0.52 2500 2500 0.8 10 0.3 5 1.35 SC&N 2~3
    QPD4-10-1000-K13-S 0.01 1 130 130 0.9 16 0.3 5 1.7 SMA 2~3
    QPD4-20-100-K6-NMT 0.02 0.1 600 600 0.5 18 0.3 3 1.3 N&TNC 2~3
    QPD4-20-200-1K-EN 0.02 0.2 1000 1000 0.7 10 0.2 5 1.25 SC&N 2~3
    QPD4-20-200-1K-N 0.02 0.2 1000 1000 0.7 10 0.2 5 1.25 N 2~3
    QPD4-20-200-2K5-EN 0.02 0.2 2500 2500 0.5 10 0.2 5 1.25 SC&N 2~3
    QPD4-20-400-K2-S 0.02 0.4 200 200 0.7 12 0.2 5 1.35 SMA 2~3
    QPD4-20-400-K3-S 0.02 0.4 300 300 0.7 12 0.2 5 1.35 SMA 2~3
    QPD4-20-500-K1-S 0.02 0.5 100 100 1 15 0.3 5 1.6 SMA 2~3
    QPD4-20-500-K2-S 0.02 0.5 200 200 0.6 14 0.2 3 1.25 SMA 2~3
    QPD4-20-1000-K15-S 0.02 1 150 - 0.9 17 0.2 5 1.5 SMA 2~3
    QPD4-20-1000-K2-S 0.02 1 200 200 1 12 0.25 5 1.3 SMA 2~3
    QPD4-30-520-1K-N 0.03 0.52 1000 1000 0.7 10 0.2 5 1.25 N 2~3
    QPD4-30-520-1K-EN 0.03 0.52 1000 1000 0.7 10 0.2 5 1.25 SC&N 2~3
    QPD4-30-560-60-S 0.03 0.56 60 - 0.7 18 0.2 4 1.4 SMA 2~3
    QPD4-30-1000-K3-N 0.03 1 300 300 0.9 5 0.3 5 1.3 N 2~3
    QPD4-40-900-R5-N 0.04 0.9 0.5 0.375 1.8 18 0.8 4 1.4 N 2~3
    QPD4-50-520-2K-EN 0.05 0.52 2000 2000 0.7 10 0.2 5 1.25 SC&N 2~3
    QPD4-50-1000-K3-N 0.05 1 300 300 1 12 0.2 5 1.35 N 2~3
    QPD4-70-75-K1-S 0.07 0.075 100 100 0.7 20 0.3 3 1.2 SMA 2~3
    QPD4-70-75-K5-S 0.07 0.075 500 500 0.7 20 0.3 3 1.2 SMA 2~3
    QPD4-70-500-1K4-7N 0.07 0.5 1400 1400 0.9 8 0.2 3 1.35 7/16 DIN (L29)&N 2~3
    QPD4-70-2000-30-B 0.07 2 30 2 5.8 18 0.4 4 1.3 BNC 2~3
    QPD4-76-108-50-N 0.076 0.108 50 - 0.25 20 0.1 3 1.18 N 2~3
    QPD4-80-200-3K-EN 0.08 0.2 3000 3000 0.5 10 0.2 5 1.25 SC&N 2~3
    QPD4-80-400-3K-7N 0.08 0.4 3000 3000 0.5 10 0.2 5 1.25 7/16 DIN (L29)&N 2~3
    QPD4-80-400-3K5-A17 0.08 0.4 3500 3500 0.5 _ 0.2 4 1.4 1-5/8″ (IF70)&7/16 DIN (L29) 2~3
    QPD4-80-500-30-S 0.08 0.5 30 2 1.5 20 0.2 3 1.25 SMA 2~3
    QPD4-80-520-K2-S 0.08 0.52 200 200 0.7 12 0.2 5 1.3 SMA 2~3
    QPD4-80-520-1K5-EN 0.08 0.52 1500 1500 0.7 10 0.2 5 1.25 SC&N 2~3
    QPD4-80-520-1K5-7N 0.08 0.52 1500 1500 0.7 10 0.2 5 1.25 7/16 DIN (L29)&N 2~3
    QPD4-80-1000-20-S 0.08 1 20 20 0.9 12 0.2 5 1.35 SMA 2~3
    QPD4-80-1000-K2-S 0.08 1 200 - 0.9 12 0.2 5 1.35 SMA 2~3
    QPD4-80-1000-K5-N 0.08 1 500 - 0.9 12 0.2 5 1.35 N 2~3
    QPD4-80-1000-K75-N 0.08 1 750 750 0.6 15 0.3 5 1.35 N 2~3
    QPD4-80-1000-1K-N 0.08 1 1000 1000 0.9 5 0.3 5 1.3 N 2~3
    QPD4-80-1000-1K5-EN 0.08 1 1500 - 0.9 5 0.3 5 1.3 SC&N 2~3
    QPD4-80-1000-2K-7N 0.08 1 2000 - 0.9 5 0.3 5 1.3 7/16 DIN (L29)&N 2~3
    QPD4-80-1000-2K-7N-1 0.08 1 2000 2000 0.7 - 0.2 3 1.6 7/16 DIN (L29)&N 2~3
    QPD4-80-1000-3K5-A1N 0.08 1 3500 3500 0.7 - 0.2 5 1.6 1-5/8″ (IF70)&N 2~3
    QPD4-80-1000-3K5-A17 0.08 1 3500 3500 0.7 - 0.2 5 1.6 1-5/8″ (IF70)&7/16 DIN (L29) 2~3
    QPD4-80-3000-30 0.08 3 30 2 4.6 20 0.3 2 1.3 SMA, SMP 2~3
    QPD4-100-180-K5 0.1 0.18 500 500 0.3 18 0.1 1 1.25 N, TNC 2~3
    QPD4-100-400-30-S 0.1 0.4 30 2 1 20 0.3 3 1.25 SMA 2~3
    QPD4-100-500-50 0.1 0.5 50 3 0.8 20 0.2 3 1.25 SMA, N 2~3
    QPD4-100-500-K5-7 0.1 0.5 500 100 0.6 20 0.2 2 1.3 7/16 DIN (L29) 2~3
    QPD4-100-520-K2-S 0.1 0.52 200 200 0.9 12 0.2 5 2 SMA 2~3
    QPD4-100-520-K6-NMT 0.1 0.52 600 600 0.7 10 0.3 3 1.3 N&TNC 2~3
    QPD4-100-520-2K-7N 0.1 0.52 2000 2000 0.5 20 0.15 5 1.4 7/16 DIN (L29)&N 2~3
    QPD4-100-1000-30 0.1 1 30 2 1.8 18 0.3(tipikal) 4(tipikal) 1.25 SMA, N 2~3
    QPD4-100-2000-30-S 0.1 2 30 2 3.4 20 0.3 4 1.3 SMA 2~3
    QPD4-100-4000-30-S 0.1 4 30 1 4 15 0.4 8 1.5 SMA 2~3
    QPD4-105-140-K1 0.105 0.14 100 100 0.4 20 0.1 1 1.25 N, TNC 2~3
    QPD4-106-176-K1-N 0.106 0.176 100 5 0.3 20 0.1 1 1.25 N 2~3
    QPD4-108-138-K21-N 0.108 0.138 210 210 0.3 15 0.1 4 1.2 N 2~3
    QPD4-110-3800-30 0.11 3.8 30 2 3.5 19 0.2 4 1.4 SMA, N 2~3
    QPD4-118-138-K5-N 0.118 0.138 500 200 0.5 25 0.2 2 1.2 N 2~3
    QPD4-120-150-50-N 0.12 0.15 50 3 0.5 20 0.2 3 1.2 N 2~3
    QPD4-120-560-50-N 0.12 0.56 50 3 1 20 0.2 3 1.2 N 2~3
    QPD4-136-174-K3-N 0.136 0.174 300 25 0.4 20 0.2 2 1.2 N 2~3
    QPD4-138-960-50-N 0.138 0.96 50 3 1 18 0.2 3 1.25 N 2~3
    QPD4-150-960-50-N 0.15 0.96 50 2 1.4 20 0.4 4 1.4 N 2~3
    QPD4-150-2500-30-S 0.15 2.5 30 2 2.8 18 0.3 4 1.25 SMA 2~3
    QPD4-175-225-1K3-NA7 0.175 0.225 1300 1300 0.7 10 0.2 3 1.35 N&Pin φ1.6 2~3
    QPD4-200-250-30-S 0.2 0.25 30 2 0.5 20 0.3 3 1.2 SMA 2~3
    QPD4-200-500-K3-N 0.2 0.5 300 30 0.5 20 0.3 3 1.2 N 2~3
    QPD4-200-2000-30 0.2 2 30 2 1.6 20 0.3 3 1.3 SMA, N 2~3
    QPD4-200-3000-30 0.2 3 30 2 2 20 0.3 3 1.35 SMA, N 2~3
    QPD4-200-4000-30-S 0.2 4 30 2 2.4 20 0.3 4 1.35 SMA 2~3
    QPD4-200-6000-20-S 0.2 6 20 1 4 20 0.3 4 1.45 SMA 2~3
    QPD4-225-400-K1-N 0.225 0.4 100 5 0.35 20 0.1 1 1.25 N 2~3
    QPD4-240-270-K2-S 0.24 0.27 200 200 0.5 20 0.2 5 1.25 SMA 2~3
    QPD4-240-270-K2-N 0.24 0.27 200 200 0.5 20 0.2 5 1.25 N 2~3
    QPD4-245-255-K1-S 0.245 0.255 100 1 0.5 25 0.2 3 1.25 SMA 2~3
    QPD4-250-6000-30-S 0.25 6 30 2 3.5 18 0.3 4 1.3 SMA 2~3
    QPD4-300-1000-K3-N 0.3 1 300 30 0.4 18 0.3 3 1.25 N 2~3
    QPD4-300-3000-30-S 0.3 3 30 2 1.2 20 0.3 4 1.3 SMA 2~3
    QPD4-300-6000-30-S 0.3 6 30 2 2.5 20 0.3 4 1.35 SMA 2~3
    QPD4-300-18000-30-S 0.3 18 30 5 5.9 18 0.4 5 1.5 SMA 2~3
    QPD4-300-26500-30-S 0.3 26.5 30 2 8.3 18 0.5 6 1.6 SMA 2~3
    QPD4-300-40000-20-K 0.3 40 20 2 11.8 18 0.5 7 1.7 2.92mm 2~3
    QPD4-350-700-K2-S 0.35 0.7 200 200 0.8 15 0.2 5 1.35 SMA 2~3
    QPD4-350-700-K5-S 0.35 0.7 500 500 0.8 15 0.2 5 1.35 SMA 2~3
    QPD4-350-700-2K4-7N 0.35 0.7 2400 2400 0.8 12 0.3 3 1.5 7/16 DIN (L29)&N 2~3
    QPD4-350-750-K3-NS 0.35 0.75 300 300 0.5 20 0.2 4 1.25 SMA&N 2~3
    QPD4-350-750-2K-7N 0.35 0.75 2000 2000 0.5 15 0.2 4 1.25 7/16 DIN (L29)&N 2~3
    QPD4-350-800-50-N 0.35 0.8 50 10 0.5 18 0.3 3 1.25 N 2~3
    QPD4-350-830-K15-B 0.35 0.83 150 15 0.8 20 0.3 3 1.3 BNC 2~3
    QPD4-350-3800-30 0.35 3.8 30 2 1.8 18 0.3 4 1.3 SMA, N 2~3
    QPD4-380-460-K1-7 0.38 0.46 100 - 0.5 20 0.3 3 1.25 7/16 DIN (L29) 2~3
    QPD4-380-470-K3-N 0.38 0.47 300 25 0.4 20 0.2 2 1.2 N 2~3
    QPD4-380-650-K2-S 0.38 0.65 200 - 0.6 18 0.8 5 1.3 SMA 2~3
    QPD4-380-8000-30-S 0.38 8 30 2 2.6 18 0.3 4 1.35 SMA 2~3
    QPD4-400-470-30-S 0.4 0.47 30 2 0.5 20 0.3 3 1.2 SMA 2~3
    QPD4-400-500-10-S 0.4 0.5 10 - 0.7 20 0.4 7 1.3 SMA 2~3
    QPD4-400-1000-30-N 0.4 1 30 2 0.5 20 0.3 3 1.25 N 2~3
    QPD4-400-1000-K1-S 0.4 1 100 100 0.6 10 0.2 5 1.3 SMA 2~3
    QPD4-400-1000-K1-N 0.4 1 100 10 0.5 20 0.3 3 1.25 N 2~3
    QPD4-400-1000-K2-N 0.4 1 200 20 0.6 18 0.3 3 1.3 N 2~3
    QPD4-400-1000-1K5-EN 0.4 1 1500 1500 0.7 5 0.2 5 1.5 SC&N 2~3
    QPD4-400-2000-30 0.4 2 30 2 1 23 0.2(tipikal) 2(tipikal) 1.25 SMA, N 2~3
    QPD4-400-3000-K4-N 0.4 3 400 400 0.8 - 0.4 5 1.4 N 2~3
    QPD4-400-4000-30-S 0.4 4 30 2 1.4 20 0.3 4 1.3 SMA 2~3
    QPD4-400-6000-30 0.4 6 30 2 2 20 0.3 5 1.35 SMA, N, TNC, SMP 2~3
    QPD4-400-8000-30 0.4 8 30 2 2.2 18 0.4 4 1.4 SMA, N 2~3
    QPD4-450-6000-30-S 0.45 6 30 2 2.4 20 0.2 4 1.3 SMA 2~3
    QPD4-500-1000-20-N 0.5 1 20 1 0.8 20 0.2 3 1.25 N 2~3
    QPD4-500-1000-30-S 0.5 1 30 2 0.6 20 0.3 3 1.3 SMA 2~3
    QPD4-500-2000-30 0.5 2 30 2 1 20 0.2 3 1.3 SMA, N 2~3
    QPD4-500-2000-K1-S 0.5 2 100 - 0.75 18 0.3 4 1.3 SMA 2~3
    QPD4-500-2000-K4-NS 0.5 2 400 400 0.7 - 0.6 5 1.5 SMA&N 2~3
    QPD4-500-2000-K6-N 0.5 2 600 600 0.6 - 0.35 5 1.35 N 2~3
    QPD4-500-3000-30-S 0.5 3 30 2 1 20 0.3 4 1.2 SMA 2~3
    QPD4-500-3000-50-S 0.5 3 50 - 1 13 0.3 4 1.5 SMA 2~3
    QPD4-500-3000-K1-S 0.5 3 100 100 1 15 1.2 5 1.5 SMA 2~3
    QPD4-500-4000-K1-S 0.5 4 100 5 3.8 18 0.3 4 1.4 SMA 2~3
    QPD4-500-4000-K1-N 0.5 4 100 10 2 18 0.3 4 1.4 N 2~3
    QPD4-500-6000-30 0.5 6 30 2 2 20 0.2(tipikal) 3(tipikal) 1.35 SMA, N, TNC, SMP 2~3
    QPD4-500-6000-30-DC 0.5 6 30 2 2.2 20 0.5 5 1.4 SMA, N 2~3
    QPD4-500-18000-30-S 0.5 18 30 1 2.5 15 0.8 8 2 SMA 2~3
    QPD4-500-26500-20-S 0.5 26.5 20 1 3 14 0.5 6 1.5 SMA 2~3
    QPD4-500-40000-20-K 0.5 40 20 1 5 11 0.5 7 1.7 2.92mm 2~3
    QPD4-555-3400-30-N 0.555 3.4 30 2 1.2 18 0.3 4 1.25 N 2~3
    QPD4-600-2000-30-S 0.6 2 30 - 0.8 20 0.3 3 1.25 SMA 2~3
    QPD4-600-3600-K1-S 0.6 3.6 100 5 2 10 0.3 4 1.3 SMA 2~3
    QPD4-600-8000-30-S 0.6 8 30 2 2.2 20 0.3 4 1.3 SMA 2~3
    QPD4-698-960-K3-NS 0.698 0.96 300 300 0.4 15 0.2 3 1.4 SMA&N 2~3
    QPD4-698-960-K5-NS 0.698 0.96 500 500 0.4 15 0.2 3 1.4 N&SMA 2~3
    QPD4-698-2700-50-N 0.698 2.7 50 3 0.8 18 0.3 4 1.3 N 2~3
    QPD4-698-2700-K5-N 0.698 2.7 500 100 0.6 - 0.25 5 1.45 N 2~3
    QPD4-698-4000-50-N 0.698 4 50 - 2 20 0.3 4 1.25 N 2~3
    QPD4-698-4000-50-4 0.698 4 50 3 1.5 20 0.3 4 1.3 4.3/10 2~3
    QPD4-700-1100-30-S 0.7 1.1 30 2 0.4 22 0.3 3 1.2 SMA 2~3
    QPD4-700-2000-30-N 0.7 2 30 2 0.6 20 0.3 3 1.2 N 2~3
    QPD4-700-2700-30 0.7 2.7 30 2 0.8 20 0.1 1 1.3 SMA, SMP 2~3
    QPD4-700-3000-30-S 0.7 3 30 2 0.8 20 0.3 4 1.2 SMA 2~3
    QPD4-700-3000-K4-NS 0.7 3 400 400 0.7 16 0.8 8 1.5 N&SMA 2~3
    QPD4-700-4000-30 0.7 4 30 2 1 20 0.4 4 1.3 SMA, N 2~3
    QPD4-700-4700-30-N 0.7 4.7 30 2 1.6 20 0.3 4 1.3 N 2~3
    QPD4-700-5000-30-N 0.7 5 30 2 2 18 0.3 5 1.4 N 2~3
    QPD4-750-1710-30-S 0.75 1.71 30 2 0.4 20 0.3 3 1.2 SMA 2~3
    QPD4-800-2500-30 0.8 2.5 30 2 0.5 20 0.2 0.5 1.3 SMA, SMP 2~3
    QPD4-800-2700-30-S 0.8 2.7 30 2 0.6 20 0.3 4 1.25 SMA 2~3
    QPD4-800-3000-K5-N 0.8 3 500 500 0.8 - 0.25 6 1.5 N 2~3
    QPD4-800-3100-K6-N 0.8 3.1 600 - 0.65 - 0.3 5 1.3 N 2~3
    QPD4-800-4000-K1-S 0.8 4 100 100 0.8 18 0.4 5 1.4 SMA 2~3
    QPD4-800-4200-K2-N 0.8 4.2 200 5 1.8 18 0.4 4 1.4 N 2~3
    QPD4-800-5000-20-S 0.8 5 20 1 1 18 0.15 2 1.3 SMA 2~3
    QPD4-820-1150-K8-N7 0.82 1.15 800 800 0.6 20 0.4 5 1.3 7/16 DIN (L29)&N 2~3
    QPD4-850-1150-K25-NS 0.85 1.15 250 250 0.6 20 0.4 5 1.3 SMA&N 2~3
    QPD4-850-1150-K8-7N 0.85 1.15 800 800 0.6 20 0.4 5 1.3 7/16 DIN (L29)&N 2~3
    QPD4-850-2150-30-N 0.85 2.15 30 2 0.6 22 0.3 3 1.2 N 2~3
    QPD4-950-1220-K45-N 0.95 1.22 450 450 0.5 18 0.3 3 1.3 N 2~3
    QPD4-950-2150-30 0.95 2.15 30 2 0.6 25 0.3 2 1.25 SMA, N 2~3
    QPD4-950-2150-30-DC 0.95 2.15 30 2 0.6 25 0.3 2 1.25 SMA, N 2~3
    QPD4-1000-2000-30 1 2 30 2 0.8 20 0.3 3 1.3 SMA, N 2~3
    QPD4-1000-2000-K2-N 1 2 200 200 0.6 15 0.3 10 1.5 N 2~3
    QPD4-1000-2000-K4-7N 1 2 400 400 0.6 15 0.3 10 1.5 7/16 DIN (L29)&N 2~3
    QPD4-1000-2000-K8-7N 1 2 800 800 0.6 15 0.3 10 1.5 7/16 DIN (L29)&N 2~3
    QPD4-1000-2500-K1 1 2.5 100 100 0.5 20 0.3 2 1.25 N, SMA, TNC, SMP 2~3
    QPD4-1000-3000-30 1 3 30 2 0.9 24 0.2 3 1.2 SMA, SMP 2~3
    QPD4-1000-4000-30 1 4 30 2 0.8 20 0.2(tipikal) 3(tipikal) 1.3 SMA, N 2~3
    QPD4-1000-6000-30-S 1 6 30 2 1.2 20 0.3 4 1.3 SMA 2~3
    QPD4-1000-6000-1K5-7N 1 6 1500 1500 0.5 8 0.2 5 1.3 7/16 DIN (L29)&N 2~3
    QPD4-1000-8000-30-S 1 8 30 2 1.5 20 0.4 5 1.4 SMA 2~3
    QPD4-1000-8000-K1-S 1 8 100 100 1.3 20 0.4 5 1.5 SMA 2~3
    QPD4-1000-18000-20-S 1 18 20 1 3 16 0.5 6 1.55 SMA 2~3
    QPD4-1000-26500-20-S 1 26.5 20 1 3 16 0.5 6 1.5 SMA 2~3
    QPD4-1000-40000-20-K 1 40 20 1 4.8 16 0.5 7 1.7 2.92mm 2~3
    QPD4-1000-50000-20-2 1 50 20 2 5.9 16 0.7 9 1.7 2.4mm 2~3
    QPD4-1000-67000-12-V 1 67 12 1 9.3 16 0.8 11 1.8 1.85mm 2~3
    QPD4-1100-1700-30 1.1 1.7 30 2 0.5 20 0.3 3 1.2 BNC, TNC, N 2~3
    QPD4-1100-2700-K1-S 1.1 2.7 100 10 0.6 18 0.3 4 1.25 SMA 2~3
    QPD4-1130-1250-K8-N 1.13 1.25 800 800 0.5 18 0.3 5 1.35 N 2~3
    QPD4-1130-1250-1K5-N7 1.13 1.25 1500 1500 0.5 18 0.3 5 1.35 7/16 DIN (L29)&N 2~3
    QPD4-1200-1400-K15-N 1.2 1.4 150 150 0.35 18 0.2 2 1.3 N 2~3
    QPD4-1200-1400-K15-NS 1.2 1.4 150 150 1 15 0.3 3 1.5 SMA&N 2~3
    QPD4-1200-1400-1K2-7N 1.2 1.4 1200 1200 0.6 - 0.2 5 1.5 7/16 DIN (L29)&N 2~3
    QPD4-1215-1785-K12-7N 1.215 1.785 120 120 0.4 - 0.3 4 1.3 7/16 DIN (L29)&N 2~3
    QPD4-1300-2400-30-S 1.3 2.4 30 2 0.5 22 0.1 1 1.2 SMA 2~3
    QPD4-1805-1880-K6-N 1.805 1.88 600 600 0.6 18 0.15 3 1.3 N 2~3
    QPD4-1900-5800-30-S 1.9 5.8 30 2 0.5 20 0.3 4 1.25 SMA 2~3
    QPD4-2000-4000-30 2 4 30 2 0.8 20 0.3 3 1.25 SMA, N 2~3
    QPD4-2000-4000-K1-S 2 4 100 100 0.8 16 0.3 6 1.4 SMA 2~3
    QPD4-2000-4000-1K2-NS 2 4 1200 1200 0.8 15 0.5 10 1.5 SMA&N 2~3
    QPD4-2000-6000-30 2 6 30 2 1 20 0.3 4 1.25 SMA, N 2~3
    QPD4-2000-6000-K4 2 6 400 - 0.8 15 0.5 10 1.6 SMA, N 2~3
    QPD4-2000-6000-K5-N 2 6 500 500 0.8 15 0.5 10 1.6 N 2~3
    QPD4-2000-6000-K6-N 2 6 600 600 0.5 - 0.3 4 1.4 N 2~3
    QPD4-2000-6000-K65-7N 2 6 650 650 0.5 - 0.3 4 1.4 7/16 DIN (L29)&N 2~3
    QPD4-2000-8000-30 2 8 30 2 1.1 20 0.3 1 1.4 SMA, N, TNC, SMP 2~3
    QPD4-2000-8000-K25-N 2 8 250 250 0.7 - 0.2 4 1.5 N 2~3
    QPD4-2000-9000-30-S 2 9 30 2 1.8 18 0.3 4 1.4 SMA 2~3
    QPD4-2000-12000-20-S 2 12 20 1 1.6 17 0.4 5 1.5 SMA 2~3
    QPD4-2000-18000-20-S 2 18 20 1 1.6 18 0.4 6 1.5 SMA 2~3
    QPD4-2000-18000-20-N 2 18 20 1 2.2 17 0.4 6 1.6 N 2~3
    QPD4-2000-18000-K1-S 2 18 100 100 1.8 - 0.5 6 1.6 SMA 2~3
    QPD4-2000-26500-20-S 2 26.5 20 1 2.6 16 0.5 6 1.7 SMA 2~3
    QPD4-2000-40000-20-K-1 2 40 20 1 3 15 0.5 10 2.1 2.92mm 2~3
    QPD4-2000-50000-20-2 2 50 20 1 4.8 16 0.6 10 1.7 2.4mm 2~3
    QPD4-2000-67000-12-V 2 67 12 1 6.8 16 0.8 10 1.8 1.85mm 2~3
    QPD4-2400-5900-50-N 2.4 5.9 50 3 0.6 18 0.2 3 1.3 N 2~3
    QPD4-2430-2470-K1-N 2.43 2.47 100 100 0.5 20 0.3 3 1.25 N 2~3
    QPD4-2500-4000-K2-N 2.5 4 200 20 1 18 0.3 4 1.35 N 2~3
    QPD4-2600-3500-K15-N 2.6 3.5 150 10 0.5 18 0.2 3 1.25 N 2~3
    QPD4-3000-5000-K1-N 3 5 100 10 0.8 18 0.3 4 1.25 N 2~3
    QPD4-3400-3800-K1-N 3.4 3.8 100 10 0.6 20 0.2 3 1.25 N 2~3
    QPD4-4000-8000-30-S 4 8 30 2 0.6 20 0.3 3 1.3 SMA 2~3
    QPD4-4000-8000-K4-N 4 8 400 400 0.9 16 0.6 5 1.5 N 2~3
    QPD4-4000-12000-30-S 4 12 30 2 1.2 18 0.2 5 1.4 SMA 2~3
    QPD4-4000-18000-20-S 4 18 20 1 1.6 18 0.4 6 1.5 SMA 2~3
    QPD4-5400-5800-K3-N 5.4 5.8 300 300 0.4 18 0.4 5 1.4 N 2~3
    QPD4-5400-5800-K3-S 5.4 5.8 300 - 0.4 18 0.4 5 1.4 SMA 2~3
    QPD4-5400-6800-20-S 5.4 6.8 20 1 0.6 20 0.4 4 1.3 SMA 2~3
    QPD4-5500-6000-30-SM 5.5 6 30 2 0.6 20 0.3 4 1.3 SMA 2~3
    QPD4-5900-8000-K15-S 5.9 8 150 - 0.8 18 0.5 5 1.4 SMA 2~3
    QPD4-6000-11000-20-S 6 11 20 1 1 18 0.3 4 1.3 SMA 2~3
    QPD4-6000-18000-20-S 6 18 20 1 1.3 18 0.3 6 1.5 SMA 2~3
    QPD4-6000-18000-50-SMS 6 18 50 - 1.5 18 0.4 5 1.6 SMA 2~3
    QPD4-6000-18000-K1-S 6 18 100 - 1.5 15 0.4 5 1.6 SMA 2~3
    QPD4-6000-18000-K1-S-1 6 18 100 100 0.7 15 0.5 8 1.6 SMA 2~3
    QPD4-6000-26500-30-S 6 26.5 30 2 1.9 18 0.4 4 1.6 SMA 2~3
    QPD4-6000-40000-20-K 6 40 20 1 3 16 0.5 6 1.6 2.92mm 2~3
    QPD4-6000-50000-20-2 6 50 20 1 3.4 18 0.6 7 1.7 2.4mm 2~3
    QPD4-6000-67000-12-V 6 67 12 1 4.5 16 0.8 10 1.8 1.85mm 2~3
    QPD4-6900-7400-30-S 6.9 7.4 30 2 0.5 20 0.3 3 1.25 SMA 2~3
    QPD4-7000-9000-K2-S 7 9 200 200 0.8 17 0.5 5 1.4 SMA 2~3
    QPD4-7000-9000-30 7 9 30 2 0.6 18 0.2 3 1.3 SMA, N 2~3
    QPD4-8000-12000-30-S 8 12 30 2 1 18 0.4 5 1.3 SMA 2~3
    QPD4-8000-30000-20-K 8 30 20 1 1.6 16 0.4 4 1.5 2.92mm 2~3
    QPD4-10000-26500-20-K 10 26.5 20 1 1.2 16 0.4 6 1.5 2.92mm 2~3
    QPD4-10000-40000-20-K 10 40 20 1 1.5 16 0.4 6 1.5 2.92mm 2~3
    QPD4-10900-12700-20 10.9 12.7 20 1 1 18 0.4 5 1.4 SMA, N 2~3
    QPD4-12000-15000-20-S 12 15 20 1 1 18 0.3 4 1.4 SMA 2~3
    QPD4-13750-14500-20 13.75 14.5 20 1 1 18 0.4 5 1.4 SMA, N 2~3
    QPD4-15000-17000-20-S 15 17 20 1 1.2 18 0.4 4 1.4 SMA 2~3
    QPD4-18000-26500-20-K 18 26.5 20 1 1.6 16 0.4 6 1.6 2.92mm 2~3
    QPD4-18000-40000-20-K 18 40 20 1 1.5 16 0.4 6 1.5 2.92mm 2~3
    QPD4-18000-50000-20-2 18 50 20 1 2.5 15 0.6 10 1.8 2.4mm 2~3
    QPD4-18000-67000-12-V 18 67 12 1 3.6 16 0.8 10 1.8 1.85mm 2~3
    QPD4-19000-33000-20-K 19 33 20 1 1.5 18 0.4 5 1.5 2.92mm 2~3
    QPD4-24000-30000-20-K 24 30 20 1 1 16 0.4 6 1.5 2.92mm 2~3
    QPD4-24000-40000-20-K 24 40 20 1 1.6 16 0.4 8 1.8 2.92mm 2~3
    QPD4-24500-25500-1-K 24.5 25.5 1 - 1.5 20 0.7 10 1.5 2.92mm 2~3
    QPD4-25000-50000-20-V 25 50 20 1 2 15 0.6 10 1.8 1.85mm 2~3
    QPD4-26000-31000-20-K 26 31 20 1 1.4 16 0.4 6 1.5 2.92mm 2~3
    QPD4-26500-67000-12-V 26.5 67 12 1 3.6 16 0.7 9 1.8 1.85mm 2~3
    QPD4-34000-36000-20-K 34 36 20 1 1.4 16 0.4 5 1.5 2.92mm 2~3
    QPD4-40000-67000-12-V 40 67 12 1 3.8 16 0.8 10 1.9 1.85mm 2~3

    MGA GIREKOMENDAR NGA PRODUKTO

    • Mga Multiplier sa Frequency RF Microwave Milimetro nga Balud Frequency sa Radyo 2X 3X 4X 6X 10X 12X

      Mga Multiplier sa Frequency RF Microwave Millimeter W...

    • Mga Waveguide Isolator Broadband Octave RF Microwave Milimetro nga Balud

      Mga Waveguide Isolator Broadband Octave RF Microwa...

    • Mga Sistema sa Amplifier nga Ubos ang Kasaba RF BroadBand EMC Microwave Milimetro nga Balud mm nga balud Taas nga Frequency

      Mga Sistema sa Low Noise Amplifier nga RF BroadBand EMC M...

    • Mga Terminasyon sa Ubos nga PIM RF Radio Milimetro nga Balud Taas nga Frequency

      Mga Terminasyon sa Ubos nga PIM nga RF Radio Millimeter Wave H...

    • Dobleng Direksyon nga mga Coupler RF BroadBand Taas nga Gahom nga Bi-Coaial Microwave Milimetro nga Balud Frequency sa Radyo

      Dobleng Direksyon nga mga Coupler RF BroadBand High Power...

    • Drop-In 90 Degree Couplers Radar High Power Microwave RF Milimetro nga Wave

      Drop-In 90 Degree Couplers Radar High Power Mic...

    Pindota ang enter aron mangita o ESC aron isira